Jump to content
Electronics-Lab.com Community

ngspice transfer function


ced
 Share

Recommended Posts


Hi,
I am a ngspice newbie and I'd like to get a frequential transfer function of a Wien filter
as an exercise .
I'd like to plot V(3)/ISRC versus frequency .

Here is the .sch file I simulate :

Tranfer function
ISRC 1 0 AC 1
R1 1 2 1k
C1 2 3 1u
R2 3 0 1k
C2 3 0 1u
.AC DEC 10 1 10K
.END

Here is the result I get :

ngspice 1 -> run
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000

Warning: Source isrc has no value, DC 0 assumed

Warning: singular matrix: check nodes 1 and 1

Note: starting dynamic Gmin stepping
Trying gmin = 1.0000E-03 Note: One successful Gmin step
Trying gmin = 1.0000E-04 Note: One successful Gmin step
Trying gmin = 1.0000E-05 Note: One successful Gmin step
Trying gmin = 1.0000E-06 Note: One successful Gmin step
Trying gmin = 1.0000E-07 Note: One successful Gmin step
Trying gmin = 1.0000E-08 Note: One successful Gmin step
Trying gmin = 1.0000E-09 Note: One successful Gmin step
Trying gmin = 1.0000E-10 Note: One successful Gmin step
Trying gmin = 1.0000E-11 Note: One successful Gmin step
Trying gmin = 1.0000E-12 Note: One successful Gmin step
Trying gmin = 1.0000E-12 Note: One successful Gmin step
Warning: singular matrix: check nodes 1 and 1

Warning: Dynamic Gmin stepping failed
Note: starting source stepping
Supplies reduced to 0.0000% Warning: singular matrix: check nodes 1 and 1


Trying gmin = 1.0000E-02 Note: One successful Gmin step
Trying gmin = 1.0000E-03 Note: One successful Gmin step
Trying gmin = 1.0000E-04 Note: One successful Gmin step
Trying gmin = 1.0000E-05 Note: One successful Gmin step
Trying gmin = 1.0000E-06 Note: One successful Gmin step
Trying gmin = 1.0000E-07 Note: One successful Gmin step
Trying gmin = 1.0000E-08 Note: One successful Gmin step
Trying gmin = 1.0000E-09 Note: One successful Gmin step
Trying gmin = 1.0000E-10 Note: One successful Gmin step
Trying gmin = 1.0000E-11 Note: One successful Gmin step
Trying gmin = 1.0000E-12 Note: One successful Gmin step
Note: One successful source step
Supplies reduced to 0.1000% Warning: singular matrix: check nodes 1 and 1

Supplies reduced to 0.0000% Warning: singular matrix: check nodes 1 and 1

Warning: source stepping failed

AC operating point failed -

Last Node Voltages
------------------

Node Last Voltage Previous Iter
---- ------------ -------------
1 0 0
2 0 0
3 0 0

doAnalyses: iteration limit reached

run simulation(s) aborted

Does someone has an idea about what's wrong in the scheme file ?
Thanks for your help,
ced

Link to comment
Share on other sites

  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...