polfort Posted February 12, 2010 Report Share Posted February 12, 2010 Hello out there.I am wondering if I could build some device based on optocouplers (or other solution), to seperate a USB device from the PC to make it potential free.Of course the device to be seperated could not be powered via USB. In other case I would be forced to use at least a transformer to power the device through USB.Does anyone know how to do that or has even seen such thing before?Any ideas for a solution?Best regards,polfort Quote Link to comment Share on other sites More sharing options...
polfort Posted February 14, 2010 Author Report Share Posted February 14, 2010 Just in case that someone else is looking for such a solution..Meanwhile I have found a Full/Low Speed USB Digital Isolator: ADuM4160 Quote Link to comment Share on other sites More sharing options...
esdk Posted July 28, 2010 Report Share Posted July 28, 2010 Hi,You can use a USB2ISO device - that comes complete with BOX, ADUM4160 and isolated 5V power supply. Check it out here: http://electronics-shop.dk/usb-isolatorIt can be used for any full speed USB device - and also some High speed devices that can run at Full speed.Great for removing ground loops and potential of up to 1KV.And the price is kept low at only around $50 for all 3 parts with a 2 year warranty.Best Regards,Sorenelectronics-shop.dk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.