Jump to content
Electronics-Lab.com Community

How do I calculate the voltage drop of a full wave bridge rectifier?


Recommended Posts

This should be fairly easy to do, I just don't know how to do so, I was hoping someone here could help me out.

I built a full wave bridge rectifier using 4 diodes. I put 116V AC for my input, and I got 103.8V DC out. I'm trying to figure out what my output is when my input is, for example, 125V AC or 110V AC...

I could just break out my variable transformer to some 220V and take a few measurements but, as it turns out, I don't have one. lol :'(

The alternative, of course, is math! If I knew what the output was when the input is at 100V and 120V, I could probably figure out how to calculate the output at 110V. Unfortunately, or perhaps fortunately, my power company doesn't usually fluctuate that much. Well, that doesn't work so well.  ::)

In case you where curious:
I have here a transformer with three outputs, 8V, 16V, and 24V. The input was fairly consistent 115.4V AC.
This is the output:

At the Transformer	At the Rectifier	Voltage Drop
25.7V			22.7V			3.0V
17.5V			15.4V			2.1V
08.3V			07.1V			1.2V



My data suggests the their is a correlation between the input voltage and the voltage drop at the rectifier. If you're good at math, you should be able to determine the correlation and create a formula. I'm not one of those people, so carrying on...

The voltage drop on a diode, as I recall, is .7V but, that doesn't explain the 12.2V drop that I am seeing. However, on the one side I am reading full AC, where as on the other chopped DC. I am assuming it is this choppiness (Ha, choppiness is a real word!) that is giving me the voltage loss. However, I currently have no way of testing this theory.

If you have a formula for calculating this, please share!

Does anyone have any other ideas?

Thanks!

Link to comment
Share on other sites

When you rectify an AC voltage with a rectifier then you probably want DC. But the output of a rectifier without a filter capacitor is pulsing DC but an ordinary DC voltmeter reads the average voltage.

A pretty high value filter capacitor will produce a smooth DC voltage that is 1.414 times higher than the transformer's AC voltage minus 2V if the rerctifier is a full-wave bridge and has its max allowed load current. The DC voltage will be higher if there is no load.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...