ShowMeCablesDrew Posted May 11, 2012 Report Share Posted May 11, 2012 I am going from 5pin din to TRRS.. (please see attached photos) This is for a motorcycle headset.tip - left audioring 1 (closest to tip) - right audioring 2 - micshield - groundTip------------------------5Ring1----------------------4Ring2----------------------1Sleeve---------------------2With the two grounds (pins 2 & 3) tied together. This is the best method I can think to do this. I asked a few of my colleagues and one of them expressed some concern that tieing the mic in and audio out ground could cause quite a bit of feedback. Some equipment will work fine like this, but other equipment will not function properly.I was wondering if anyone has ever tried anything like this, or can offer any insight as to whether this will work or not.Thanks! Quote Link to comment Share on other sites More sharing options...
Hero999 Posted May 11, 2012 Report Share Posted May 11, 2012 You forgot to attach the photos. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.