coronavela.x Posted June 4, 2012 Report Share Posted June 4, 2012 In some instances, PCB designs require very high amperage.This results to an increased copper weight leading to 5.0 oz.Are there PCB fabrication shops capable of this copper weight? Quote Link to comment Share on other sites More sharing options...
boblim Posted December 16, 2012 Report Share Posted December 16, 2012 Alternative you can just tin the high current copper trace path to make the trace thicker.Try to make the path as board as possible.Not all path need to be so thick. The PCB board can be very expensive.You can also try to approach PIC-CONTROL for a solution. Quote Link to comment Share on other sites More sharing options...
Guest Johnsteave7 Posted September 30, 2013 Report Share Posted September 30, 2013 I think PCB fabrication should be capable and further you may visit http://actpcb.com/panelizer-array-calculator for your better understand.Thanks!!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.