Jump to content
Electronics-Lab.com Community
taliban

5W Cree Led to 12V. How?

Recommended Posts

I have LED: CREE XR-E Q5 high power LED Light Emitter White Aluminum base 5W XLamp

Series: XLamp XR-E 7090
Guaranteed minimum Luminous Flux order codes up to 114 lm in white at 350 mA (equivalent to 1W)
Forward Voltage @ Test: 3.3V
Viewing Angle: 90°
~6000K-7000K cool xenon white color temperature
Maximum drive current: up to 228 lm at 1000 mA (~equivalent to 5W)

I read that for LED needs current limiter circuit. I find LM 317 calc and enter current 1A and Voltage 3.3V:
9c84433c7c29e549da7a3142b26be3c9.png
I see that i need resistor 1.3 Ohm. But I need connect my LED to 12V. And don't understand how I must connect it's.
I need two LM317? First LM317 for lower the voltage to 3.3V.  And two LM317 for current limit?

Share this post


Link to post
Share on other sites

There's an error in the information. You'll need 1.5A to get 5W with a forward voltage drop of 3.3V.

You don't have to worry about the voltage which is self-limited by the LED. The current just has to be limited so a constant current source is all that's required.

The LM317 won't really cut it and is only something one would use if they had nothing else to spare. The efficiency at 12V with a 3.3W LED is a pitiful 27.5% and asking it to dissipate >8.7W is a lot, even with a good heat sink.

You can buy purpose made ICs and modules for this. Here a few parts which would do what you want:

http://www.luxdrive.com/products/buckblock-a009-led-driver/
http://www.luxdrive.com/products/buckpuck-3021-3023-led-driver/
http://www.recom-international.com/pdf/Lightline/RCD-24.pdf
http://www.xppower.com/pdfs/SF_LDU08-48.pdf
http://www.xppower.com/pdfs/SF_LDU05-14.pdf

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...