Jump to content
Electronics-Lab.com Community

nano verifing code


dave1956

Recommended Posts


Can you copy this code and paste it into the IDE and get it to compile? Be sure to select nano in the IDE tools->board = "Arduino Nano". This is for an ultrasonic device but for testing you do not need  the device:


  
#define trigPin 9
#define echoPin 10
long duration;
int distance;
long firstoff;
int distancefirst;

void setup()
{
Serial.begin(9600);
pinMode(trigPin, OUTPUT);
pinMode(echoPin, INPUT);
delay(1000);
digitalWrite(trigPin, HIGH);
delayMicroseconds(10);
digitalWrite(trigPin, LOW);
firstoff = pulseIn(echoPin, HIGH);
distancefirst = firstoff*0.034/2; // cm
digitalWrite(trigPin, LOW);
delayMicroseconds(2);
digitalWrite(trigPin, HIGH);
delayMicroseconds(10);
digitalWrite(trigPin, LOW);
duration = pulseIn(echoPin, HIGH);
distance= duration*0.034/2; // cm
//distance = duration * 0.0133 / 2; // in
Serial.println(distance);
delay(1000);
Serial.println(distancefirst);



if (distance <= distancefirst - 5)
{
tone(3, 500, 500);
delay(500);
tone(3, 800, 500);
delay(500);
delay(50);
}
}

It is the first project from: https://create.arduino.cc/projecthub/projects/tags/nano

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
  • Create New...