ral8452 Posted August 18, 2022 Report Share Posted August 18, 2022 are there gerbers, or actual pcb's , available for this design, and -- more specs on the coil made here, resistance, diameter, current , etc Quote Link to comment Share on other sites More sharing options...
Rajsbom Posted August 19, 2022 Report Share Posted August 19, 2022 This inductor is made using POT Core, value Approx. 640uH to 680uH will work, current could be 100mA, you may try Drum Core Coil from Mouser Part No 80-SBCP-80HY681H https://www.mouser.in/ProductDetail/KEMET/SBCP-80HY681H?qs=pfd5qewlna7zBsC5r9mWjg%3D%3D Or you may make one using POT Core, Value approx. 680uH , Current 100mA or less https://www.digikey.com/catalog/en/partgroup/p-core-type/50202 Quote Link to comment Share on other sites More sharing options...
Pliked Posted July 5, 2023 Report Share Posted July 5, 2023 On 8/19/2022 at 6:34 PM, Rajsbom said: This inductor is made using POT Core, value Approx. 640uH to 680uH will work, current could be 100mA, you may try Drum Core Coil from Mouser Part No 80-SBCP-80HY681H https://www.mouser.in/ProductDetail/KEMET/SBCP-80HY681H?qs=pfd5qewlna7zBsC5r9mWjg%3D%3D/ Or you may make one using POT Core, Value approx. 680uH , Current 100mA or less https://www.digikey.com/catalog/en/partgroup/p-core-type/50202/tiny fishing Thanks for shairng. Quote Link to comment Share on other sites More sharing options...
login
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.