16 Channel Tiny InfraRed Remote Controller – NEC Code

  • Rajkumar Sharma
  • 18.658 Views
  • medium
  • Tested
  • SKU: EL50641
  • Quote Now

16-Channel-Tiny-Infra-Red-Remote-Controller-NEC-PIC02

16 Channel Infra-Red remote controller is built around PIC16F73 Microcontroller from Microchip. The receiver part follows NEC Code Format. Tiny receiver provides 16 latch outputs. All outputs are TTL and can drive Relay board or solid state relay. The circuit uses TSOP1738 Infra-Red receiver module which provides high degree of noise immunity against interfering light source.

For Philips RC5 code check this project: 16 Channel InfraRed remote controller – RC5 Philips Code

Features

  • Supply Remote Transmitter 3V CR2025 Battery
  • Supply Receiver 7V to 12V DC
  • Modulation 38Khz
  • NEC Code Format
  • Operating range up to 10-15 feet
  • 2 Pin Screw Terminals for Supply Input
  • On Board Power LED
  • Onboard VT (Valid Transmission) LED
  • All 16 Channels are Latch Outputs
  • All Outputs TTL Level provided with Header Connector

Application

  • Robotics
  • Lights
  • Fans
  • Home Appliances
  • Remote Door closer
  • Remote Curtains
  • Security Systems

Schematic

16-Channel-Tiny-Infra-Red-Remote-Controller-NEC-H011 sch

Parts List

16-Channel-Tiny-Infra-Red-Remote-Controller-NEC-bom

Photos

16-Channel-Tiny-Infra-Red-Remote-Controller-NEC-003

16-Channel-Tiny-Infra-Red-Remote-Controller-NEC-PIC01

Video

Please follow and like us:
Pin Share

PCB



Subscribe
Notify of
guest

11 Comments
Inline Feedbacks
View all comments
Subhash

How I program the PICs

Subhash

Can you suggest any PIC kit or a link about it.and also about soft.

Robson Saro

CAN I SELECT THE MODE? PULSE OR LATCH?

Sreenu

Which PICkit uses this program sir

Pankaj

Can i please get the “C” source code for PIC?

uwexb

thank you very much sir, for the project you provided above, even though I had trouble importing the hex.file to PIC’s, for 4 days I was looking for a way to import it to PIC’s. and finally it worked well and good, however, I’m still having trouble finding remotes for NEC’s products, which are in my country, Indonesia. thank you very much.

RELATED PROJECTS

TOP PCB Companies