TRENDING:

5 Amp H-Bridge DC Motor Driver using MC33886

  • Rajkumar Sharma
  • 28.130 Views
  • easy
  • Tested
  • SKU: EL49319
  • Quote Now

5A-H-Bridge-Module-using-MC33886-PIC01

This tiny module has been designed to be used in Robotics, Power tools, automotive applications etc. The module is based on MC33886 from NXP. The MC33886 is a monolithic power IC comprising control logic, charge pump, gate drive, and low RDS(ON)MOSFET, H-Bridge output circuitry in a small surface-mount package. MC33886 is a monolithic H-Bridge ideal for fractional horsepower DC-Motor and bi-directional thrust solenoid control. The IC incorporates internal control logic, charge pump, gate drive, and low Rds. MOSFET output circuitry. The MC33886 is able to control continuous inductive DC load currents up to 5A. Output loads can be pulse-width modulated (PWM) at frequencies up to 10 KHz. A Fault status output reports under-voltage, short-circuit, and over-temperature conditions. Two independent inputs control the two half-bridge totem-pole outputs.

Features

  • Supply 5V to 28V
  • TTL/CMOS compatible Inputs
  • Continuous DC Load Current up to 5.2A min
  • Output Current Limitation at min. 5.2A with PWM Current Regulation
  • Short-Circuit Shutdown for Output Currents over 8A
  • Logic Inputs TTL/CMOS Compatible
  • Operating Frequency up to 10 kHz
  • Over temperature and Short Circuit Protections
  • Under voltage disable Function
  • Output control via two independent inputs (forward, reverse, free-wheeling low/high)
  • Two disable inputs are provided: Low =True and High =True

Applications

  • DC Motor control in Robotics and industrial
  • DC Motor & actuator control in Recreational Vehicles
  • Appliances
  • Automotive
  • Powered Machines and Tools

Schematic

5A-H-Bridge-Module-using-MC33886-SCH

Parts List

5A-H-Bridge-Module-using-MC33886-BOM

Configuration

5A-H-Bridge-Module-using-MC33886-TABLE

Photos

5A-H-Bridge-Module-using-MC33886-PIC02

MC33886 Datasheet

Please follow and like us:
Pin Share

PCB



Subscribe
Notify of
guest

6 Comments
Inline Feedbacks
View all comments
Kalyan.C

Dear I wish to buy one of this.

sachith

i made this controller. but its not working. can i know how to give the pin configuration with arduino

Shamoon

Hi, can it work at 1MHz square wave input? I want to drive a coil of 12V.

RELATED PROJECTS

TOP PCB Companies