Variable Range LED Voltmeter

  • Rajkumar Sharma
  • 19.250 Views
  • moderate
  • Tested
  • SKU: EL37428
  • Quote Now

Variable_Range_LED_Voltmeter_project_Pic

This project is a Variable Range LED voltmeter.

Description

This is a variable range LED bar graph voltmeter project. It is a simple and less expensive project that displays voltage of a given source with the help of 10 LED’s. The project is based on the famous LM3914 IC from Texas instruments.

Working

The project is used as a Variable Range LED Voltmeter. The LED’s indicate the range of the input voltage applied. A power supply of 12 VDC is applied through the CN2 connector, and the variable input voltage supply is applied to the CN1 connector. IC LM3914 is a dot/bar display driver; it senses the analog voltage levels and displays its range on the LED’s.

The LED’s indicate depending upon the variable input voltage applied. Using the jumper we can select the mode of LED display. When the jumper is open it is in dot mode and when it is closed it is in bar mode. Range adjustable 0-1.3 V and 0-10.8V.

Specifications

Input : 12 VDC @ 190 mA
Range : 0 – 1.3 V and 0 – 10.8 V adjustable with onboard preset
Output : 10 LED’s
Two Modes, Bar and Dot selectable by a jumper
Very low current consumption, typical 200 mA
Header pins for connecting power and voltage in
Four mounting holes of 3.2 mm each
PCB dimensions 32 mm x 74 mm

Schematic

Variable_Range_LED_Voltmeter_project_Circuit

Parts

Variable_Range_LED_Voltmeter_project_BOM

Please follow and like us:
Pin Share

PCB



Subscribe
Notify of
guest

2 Comments
Inline Feedbacks
View all comments
Guna

So beautiful design and explanations
Thank you

Jay Hughes

Best to read the TI Application Note and take special NOTE OF THE GROUNDING (at a common point) > http://www.ti.com/lit/ds/snvs761b/snvs761b.pdf <

RELATED PROJECTS

TOP PCB Companies