I was not planning to run it continuously. Are you able to draw a diagram or find one online of the generator set up with the batteries.
I would like to avoid using four generators if possible due to cost. I was originally thinking that I would use one 24v 12a generator and charge a 24v 12ah...
I wanted to have a final output of 24v and 12a. To achieve this I was thinking that I could use two 12v 6a generators in parallel to get 12v and 12a. Then that would connect to the two 12v 12Ah batteries in series to make it 24v 12Ah.
What components would I need to change to achieve the 24v...
I found this picture online that shows what I was thinking of building. The two turbines are connected to the batteries, but I can not tell if the turbines are in parallel or not in the picture. If they are I will base my design off of the picture.
I will have to add diods to the circuit.
I want to put the generators only in parallel. I know that in parallel I will get 12v and I want the generators to produce 12v. My question for the generators are because they are in parallel will the amps add together to produce 12amps? Both generators are 12v and 6amps each.
When I mentioned...
If I put the generators and batteries in series I would get 24v like you said but I need 24v and 12amps. If I put the turbines in parallel ( 12v 6amps + 12v and 6amps = 12v and 12amps) and connect them to the series batteries ( 12v 12amps + 12v 12amps = 24v and 12amps) would this work? And yes...
I am trying to build a wind turbine to charge batteries and would like a 24v 12amp output. I am using a double turbine set up along with two batteries to charge. The generators are both listed as 12v and 6amps. The two batteries I am looking at are rated 12v 12amps. I will have the two turbines...