Microcontroller Projects
Serial-Input, Voltage-Output, 16-Bit DAC
The MAX5541 is a 16-bit digital-to-analog converter (DAC).
12-Bit – 4-Channel SPI V-OUT DAC
Digital-to-analog converters (DACs) provide accurate output voltages for actuation and control in many electronic applications such as industrial, medical, and RF systems.
Teensy 4.1 Expansion Board with DC-DC Converter
The Teensy 4.1 expansion I/O shield is designed to simplify the connection process, saving you time and effort in your project development.
Teensy 4 Expansion Board with DC-DC Converter
The Teensy 4 expansion I/O shield is designed to simplify the connection process, saving you time and effort in your project development.
Bootloader Programmer Tool for ATMEGA328 32Pin TQFP Arduinio ISP
If you have a new ATmega328P you’ll need to burn the bootloader, to be able to upload a sketch with Arduino IDE.
RC PWM Signal to Stepper Pulse Generator
This simple Arduino compatible project reads an RC PWM signal (1000μs to 2000μs) and provides 0 to 500Hz pulse output to drive a stepper motor.
16-Bit I/O Expander with Serial Interface (SPI or I2C)
This project provides 16-bit, general-purpose parallel I/O expansion for I2C or SPI bus applications.
Sound to RC Servo Driver v2.0 – Arduino Compatible
The project presented here is made for applications such as Animatronics, Puppeteer, sound-responsive toys, and robotics.
Getting Started with TivaWare Launchpad
Program a 32-bit Tivaware Board (TM4C123x series) from Texas Instruments using Embedded C from scratch.
4 Channel High-Speed – Robust-EMC Reinforced Digital Isolators
The project described here is a high-performance, quad-channel digital isolator with a 5000VRMS isolation rating as per UL1577.
4 Channel SPI Interface Isolator with three Forward and One Reverse Direction Channels
The project described here is a Quad-channel digital isolator with 5000VRMS isolation ratings per UL 1577.
DC Motor Speed, Direction and Brake Control with NRF24L01 RF Module – Arduino Compatible
This is Arduino compatible hardware that can control a single DC motor speed, direction, and brake using an RF remote control.