Recent content by D0T-C0M

  1. D0T-C0M

    Speaker help please

    Ok I installed the above tweeters and it made a hell of a difference.  I'll have to figure out how to get a 10" sub installed in my truck without taking too much space now. Thanks AudioGuru for your input.
  2. D0T-C0M

    Speaker help please

    yes the sony has a sub out. I updated the specs for the tweeters for you to comment. Thanks I appreciate your input
  3. D0T-C0M

    Speaker help please

    Ok so are these tweeters here going to do me justice? Pioneer Tune-Up Tweeter     * 7/8" PPTA (P-Phenylene Terephthal Amide) Hard Dome     * Strontium Magnet with Magnetic Fluid Cooling     * Built-in Crossover (6 dB/Octave)     * Surface or Flush Mounting Capabilities     * Overall Housing...
  4. D0T-C0M

    Speaker help please

    thanks again just one other thing, I have a pioneer GM-H100 amp that I haven't been using that can be connected 2x50W or 1x160W , how could I best utilise this amp, 1- by driving my rear speakers or 2- connecting it to one 10" sub?
  5. D0T-C0M

    Speaker help please

    Hi audioguru Yes its here's the link for the specs. It does say 4 x 50 W S-MOSFET power output but its probably peak watts. http://www.sonystyle.ca/commerce/servlet/ProductDetailDisplay?storeId=10001&langId=-1&catalogId=10001&productId=1003305&navigationPath=n32150n32153 At...
  6. D0T-C0M

    Speaker help please

    I have a sony CDX-GT310 in my toyota pickup. It puts out 4x55w in 4 ohms.  I have just have cheap 2-way speakers installed in the front and back. I got 6"round 120W in the back and 4" round 2-way 90W in the front under the dash almost. I know its a cheap system but it sounds ok except I find...
  7. D0T-C0M

    Can someone suggest a good 50 to 75Ohm impedance matching transformer?

    Ok I was told the the impedance of the stereo antenna in my truck was 75 Ohms, so I thought maybe I should match the impedances because initially I thought the signal loss would be roughly 2/3 of full power but I read up on the net while awaiting your response and I guess the signal loss from...
  8. D0T-C0M

    Can someone suggest a good 50 to 75Ohm impedance matching transformer?

    I use a FM transmitter in my truck and would like to use a normal FM antenna to transmit the signal. I think I will need a RF impedance matching transformer that will match the 50ohm impedance of my transmitter to the 75ohm impedance of the FM antenna. Can someone please suggest a good one that...
  9. D0T-C0M

    fm transmitter scematic required

    I researched the Ramsey model but they are about $60 more for a kit and about $100+ assembled. Second is the fact that EDM is also microprocessor controlled and has digital LED readout. If I can quote from their site I found all the feedback I read on all the independant website was all...
  10. D0T-C0M

    fm transmitter scematic required

    using the stock whip antenna I did some preliminary range tests. The Tx was installed in the cab of my truck with the antenna running up and down the mirror which isn't the best placement for it but nevertheless I was very happy with the range I received.  using a fairly good quality FM headset...
  11. D0T-C0M

    fm transmitter scematic required

    I recieved my EDM transmitter last Wednesday.  It is an awesome little unit. I am so impressed with the sound quality. It really sounds awesome especially when I connect my cd player to it. Sirius Sat Radio sounds alot better too. Seems to have a really great pre-emphasis stage in the input. The...
  12. D0T-C0M

    Re: Free Schematics for electronic surveillance

    I guess this site no longer reachable
  13. D0T-C0M

    Cold Heat Soldering Tool

    I have oneand you wouldnt want to use it on sensitive electronic equipment as it circulates a relatively high current through at the point where you are soldering. While it is good for welding small wires together and such I wouldnt recommend it on electronic circuitry.
  14. D0T-C0M

    Got a couple questions regarding this fm transmitter

    hehe geez your fast I re-posted my last post after re-reading your post. I thought because you said that Canada/US had to much pre-emphasis that maybe I should go with the 50uS. Now I understand that I have to go with 75uS so that the sound won't be muffled in my canadian reciever. Sorry I am...
  15. D0T-C0M

    Got a couple questions regarding this fm transmitter

    Ok so if I understand correctly I have no choice but to go with a pre-emphasis of 75uS otherwise if they set it to 50uS I will be getting muffled treble and thats certainly not what I want. correct?
See more
Top