Recent content by darryl603

  1. darryl603

    Technics SA-410 No audio from right channel

    Thanks for the input. I really appreciate it
  2. darryl603

    Technics SA-410 No audio from right channel

    Hi, I have a Technics SA-410. When it's cold and I turn it on, the left channel works fine. The right channel is silent until I turn it up to around 3 and then it comes on and stays on and works fine. I can turn it off and on and it will stay on once it's warmed up. What do you think the...
  3. darryl603

    Technics SA-828 Receiver from 70s- Is it worth trying to save this aging patient?

    Q 709 B 14.2 C 14.2 E 5.58
  4. darryl603

    Technics SA-828 Receiver from 70s- Is it worth trying to save this aging patient?

    Q 710 B 5.60 C 12.35 E 5.01
  5. darryl603

    Technics SA-828 Receiver from 70s- Is it worth trying to save this aging patient?

    What's your e mail? I can send you what I have, if you want?
  6. darryl603

    Technics SA-828 Receiver from 70s- Is it worth trying to save this aging patient?

    Hey guys, Here are the readings I got from Q707 and Q708: Incidentally, after about 10 seconds, you really don't want to leave your finger on Q708. Q707: D 24.7 G 19.3 S 5.6 Q708: B 14.3 C 24.7 E 13.7 I have a picture of the parts I replaced to get the receiver working again...
  7. darryl603

    Technics SA-828 Receiver from 70s- Is it worth trying to save this aging patient?

    Hi! How have you been? Sorry it took so long to get back but you know how life can get in the way of things you'd much rather be doing lol. Well, I got the receiver working again and I've had it powered up several hours, several times, without fail. One thing I have noticed is that Q708, which...
  8. darryl603

    Technics SA-828 - Static with audio, then stopped working

    Yeah, very weird. At first, when the relay first came on, I went to plug in a speaker on the left side and I saw a spark. So, obviously I didn't do that again lol
  9. darryl603

    Technics SA-828 - Static with audio, then stopped working

    The right side had - 62 v dc and the left side had + 62 v dc Enabling or disabling the speakers had no effect at all. What do you make of that???
  10. darryl603

    Technics SA-828 - Static with audio, then stopped working

    Yes, that's correct. R 634 64.3 64.1
  11. darryl603

    Technics SA-828 - Static with audio, then stopped working

    while I was probing around there with the stereo on, it suddenly came out of protection mode. But it wasn't good out of the speaker terminals. Basically, it squealed and cut back into protect again. When I cut the speaker output off at the front panel, it came out of protect mode again. The...
  12. darryl603

    Technics SA-828 - Static with audio, then stopped working

    I'm sorry. I re checked 8,9 and read 148k and 7,8 was about 15 M ohms Q622 was -B -63.6, C -63.2 E -63.6 D616 1.135 .259 Q628 BE .638 BC ..612 EB 1.3 CB .612 CE 1.4
  13. darryl603

    Technics SA-828 - Static with audio, then stopped working

    Okay, here goes: IC1002 pins 8, 9 147.6 ohms pins 7, 8 OL D608 -.393 D610 -65.6V D616 an -63.3 V ca -65.1 V D622 an -64.9 V ca -65.2 V
  14. darryl603

    Technics SA-828 - Static with audio, then stopped working

    Hi, I measured d1001 and got anode 38.43 and cathode 39.75 Pin 8 on IC1002 was -26.8 mV Z601 0 V Z602 -63.8 V R1049 148.7 C1009 37uf The amp is definitely in protection mode and yes, the red light is lit for safety. The display appears to be working fine.
  15. darryl603

    Technics SA-828 - Static with audio, then stopped working

    D1001 + 38.1 v - 39.4 v IC1002 1. .648 v 2. -.737 v 3. 0 4. 0 5. -347 mv 6. 37.8 v 7. 0 8. -27.7 mv 9. 2.84 v
See more
Top