Recent content by diode

  1. D

    Power supply help for air purifier

  2. D

    Power supply help for air purifier

  3. D

    Power supply help for air purifier

    The red and black connector goes to the ionizer control box, then one red wire to the ionizer element. The 2 black wire connector goes to the power cord. The multicolored 4 way connector goes to the fan motor along with the 2 white wires from the box with 250v written on it. The unit does not...
  4. D

    Power supply help for air purifier

  5. D

    Power supply help for air purifier

    The other smaller unit that failed with the same symptoms, I have 2 of. I will try to take both apart next week to swap parts but I dont like having too many things taken apart at once. I have a hunch the same part failed on the air95 and the smaller airvantage.
  6. D

    Power supply help for air purifier

    The unit is completely unresponsive like as if not plugged in. The ion function never worked. There is a relay looking device in the case, I will post photo when I get home from work.
  7. D

    Power supply help for air purifier

    The inside of the plastic housing where contacts go appears to be the same plastic the housing is made out of.
  8. D

    Power supply help for air purifier

    The fan speed and filter reset solder joints look like that, not sure if that is ok. How do I check for cracked solder joints? Magnifying glass? Both units just shut off while being used and never would turn back on or be responsive to pressing buttons. The units weren't used very long, maybe a...
  9. D

    Power supply help for air purifier

  10. D

    Power supply help for air purifier

    How do I test the yellow rectangular caps on the board? I will say the ion function never worked when I had it working, there's an led for it and an ionization element but it never lit up when pushed.
  11. D

    Power supply help for air purifier

  12. D

    Power supply help for air purifier

    Yes, I verified power to the fuse and whatnot, I had a bad connection earlier, so I have power to the board, I have power going out of the yellow red and green wires to the fan and ionizer. So I believe the return black wires are what control the fan, etc. It has the touch buttons which are...
  13. D

    Power supply help for air purifier

  14. D

    Power supply help for air purifier

    The fuse is good. I have been using the ground lead on the dmm to the neutral line to the board to clarify. I don't have power to the fuse.
  15. D

    Power supply help for air purifier

    It's hard to post better pics but I'll try to get more. I'm trying to lower resolution.
See more
Top