I saw the data sheet of the LTC3703 and there was a design example on page 27, i followed the same procedure.
LTC3703 Data Sheet
Specifications:
VIN = 24V to 100V, VOUT = 12V, IOUT(Max) = 10A, f = 250kHz
1. RSET
As per the formula in the data sheet
RSET(kOhm) = 7100/(250 - 25) = 31.5KOhm...
I have started going through the data sheet and trying to download ltspice simulation models for buck converter, but the above circuit i could not locate, have you created on your own? just for information.
Thank you for the reply, by help from other forums online i selected LTC3703 regulator, and from the application note in the data sheet https://pdf1.alldatasheet.com/datasheet-pdf/view/97352/LINER/LTC3703.html
Can i use this circuit as is to meet the requirements i mentioned? I want current...
I need to design a buck converter with the following requirements, Input voltage 24V - 100V (2 - 10 Amps) and the output voltage shall be 12V (20 Amps). I started with the following circuit available in the net.
The Diode, Inductor, Capacitor i have not yet selected, First question is how do...