Recent content by ethancr

Search Forums New Posts
  1. E

    washing machine motor wiring

    Interesting discussion. Older washing machine motors can definitely be useful for DIY projects, but the wiring can vary quite a bit depending on the motor and control system. For anyone putting an old washer back into service, it's also worth checking the motor, wiring, pump, and other...
  2. E

    Speed controller on washing machine motor

    If the motor has brushes and you want adjustable speed, a controller designed for universal motors with a tachometer feedback would be the better route. I’d first confirm the exact motor type and its voltage/current rating before connecting a 4000 W controller, since not every washing machine...
  3. E

    Scrub -washing machine malfunctioned

    If it works normally with no load but only hums when there’s a load, the motor is probably struggling to start under load. Since the starting capacitor is getting hot, I’d check or replace the capacitor first, but also make sure the motor and drum/agitator aren’t binding or unusually hard to turn.
  4. E

    Help with Mura meter 80M Wiring

    I’d be careful about reconnecting either wire based only on its color, especially with an older meter. If you have a schematic or can find another photo of the same Mura 80M, that would be the safest way to identify the connection points. You could also trace where each wire originally runs and...
  5. E

    How to find a replacement for a transformer of whirlpool oven control board (8303505)

    I’d start by identifying the exact voltage and current requirements of the original transformer rather than relying only on the part number. The secondary voltages are especially important because the control board may use different rails for the logic and other circuits. If the original...
See more
Top