Recent content by gica69

  1. G

    Charger fuse on the output side burned

    So I emailed digikey and they also said the 4DH is a proprietary. I tested it and it seems all but one set of legs are shorted I did not check the diode function but the IC is probably a combo of small resistor and maybe one or 2 diodes. Time to call the Factory and see if they have those...
  2. G

    Charger fuse on the output side burned

    https://www.ebay.com/itm/394805741363?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=sfup3onvtfw&sssrc=4429486&ssuid=G6eGuqiWQXi&var=&widget_ver=artemis&media=COPY These have DTH on them but only 6 legs
  3. G

    Charger fuse on the output side burned

    Great appreciate it
  4. G

    Charger fuse on the output side burned

    No I help a friend of mine that works with tripods and everything under the camera. He is pretty well known in Burbank. So these 6 charger were on his shelf for warranty repair. The guy that does some repairs for him returned all 6 saying the main chip is bad in all!!!? I said no way so since we...
  5. G

    Charger fuse on the output side burned

    Yeah I have another one of these chargers where there is only one that blinks. I have not tested them yet. So you could he right that they are all independent but they do have a main controller chip seen in the first 2 pictures. That coupd also be the culprit. Maybe.
  6. G

    Charger fuse on the output side burned

    Ok thanks maybe somebody else can recognize the 4DH and know what it is a semiconductor or something else. If it truely is proprietary then it explains why I cannot find it. Should be an IC.
  7. G

    Charger fuse on the output side burned

    Can that cause both Battery 1 and 3 to malfunction? If so what is 4DH or U38?
  8. G

    Charger fuse on the output side burned

    As the title says it is an Anton Bauer 26V and upon turning it on one side has the red and green lights blinking. It is supposed to supply 20V intermittently and it only does it for 30 seconds at the end of which the stay solid and the intermittent supply of 16 to 20 V ends. Both the red and...
  9. G

    Charger fuse on the output side burned

    Hello sorry for the late response wanted to tell you that I did replace the burned fuse and it ended up working on the camera. It held up well with no issues. I do have another 4 battery charger charger that is half broken and wanted to get an opinion on it. Posted it here. Thanks in advance for...
  10. G

    Charger fuse on the output side burned

    73's de Edd you sir are at a level that greatly exceeds mine in both explaining the issue and also fixing it, and that is why I appreciate the patience. I am not a novice per say on this but my rendering of information was terrible, am so sorry about that. This battery came to my friend's shop...
  11. G

    Charger fuse on the output side burned

    Sorry about the explanation above. Yes the camera works fine with a battery. The only issue is the gold mount side of the charger it doesnot deliver power to the camera as you said.
  12. G

    Charger fuse on the output side burned

    I found this one on Ebay https://www.ebay.com/itm/143699515671?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=hzec-oW2T3S&sssrc=4429486&ssuid=G6eGuqiWQXi&var=&widget_ver=artemis&media=COPY
  13. G

    Charger fuse on the output side burned

    So can I use a surface mount 7Amp but 125VDC? As I read the Voltage doesn't matter if it's higher bit at 135 is way higher
  14. G

    Charger fuse on the output side burned

    Sorry about that, it's the Anton/Bauer Tandem-70 On-Camera AC Power/Charger Yeah I saw the 7. So the battery does charge but because of the popped fuse it doesn't charge the camera. So the input fuse is fine. That white fuse is the culprit which could also involve other components triggering the...
  15. G

    Charger fuse on the output side burned

    So this is a fual unit one side charges a battery and the other plugs into a camera and keeps that running. The battery is charging but the camera does not turn on. I checked tye F3 fuse and it tests open. It's a flush mount fuse. What size should I get I included pics from the back It's output...
See more
Top