i checked flex cable again both sides didn't notice nothing bad then put 2 pieces of kapton tape then turned it on but still the same bad screen. I'm thinking is the inverter.
i did remove batery for 4 hours and turned on nothing changed, i also checked all lcd flex cable connectors they appear to be in good shape not sure about been clean but, i checked the port that connects to the monitor flex it was good and the flex cable itself although not the reverse side but...
I need advice/sugestion to know what part might be bad, Is the inverter or the flex cable or what else?
I was opening and closing the lid like a normal laptop would but without having the screws for the hinges so i believe the flex cable pulled in some wrongfuly way. I did reinsert the flex...
could someone tell me what this is? the screen turning the lamp/inverter off after a few seconds? the image on the crt remains working, when pressing FN CRT/LCD 3 times the image goes back to the lcd but still only a few seconds, i get perfect image now.
the problem was the second flex cable inside the lcd panel, I got perfect image for few minutes then a little bad then good again, it wasn't static maybe? I will try getting by with this flex cable I'm sure i can fix it by examining it without buying a used one 25$
I am trying to find what specific part might be wrong by looking at my video.
The problem started after changing the bad metal hinges in 2010 which shouldn't have nothing to do with the problem but it hapened.
Display used to display good half of the time back in 2015 or sometimes after hitting...