Martaine2005's latest activity
-
Martaine2005 replied to the thread Multimeter stopped displaying after replacing battery.Ok, so no short then. But obviously very high resistance for 9.6V at battery snap connector and 1.54V at the PCB solder joints. Are the... -
Martaine2005 replied to the thread Multimeter stopped displaying after replacing battery.Disconnect the battery and check if there is continuity between those two solder joints. There should not be!.
-
Martaine2005 replied to the thread Multimeter stopped displaying after replacing battery.Have you tried testing the voltage of the battery again?
-
Martaine2005 replied to the thread 12 volt relay's behaving strange.Your theory is correct. 30 and 87a should be a closed contact just like your wire loop. A spring in the relay holds the contacts closed...