[Bobmac]

Looking where and which male connector connects to male pins? One board has 6 pins but connector that was removed only has 3 female connections. A wiring diagram would be awesome. Thanks

 

[davenn]

Looking where and which male connector connects to male pins?

photos mite help people help you

 

[josephii3]

If you have a 6-pin header on the board but the connector only has 3 female wires, it usually means only 3 of those pins are actually used for that specific connection. Look closely at the board to see if there are any faint printed labels near those pins (like TX, RX, GND, or power).

 

[Bobmac]

Here is some info. I will check the board like you mentioned, but you may know a lot about these