connecting LED RGB stips with LED RGB diodes

Crafts4Me

Feb 10, 2022
175
Joined
Feb 10, 2022
Messages
175
hi
i have a 12amp 12v 150w transformer power supllu
i have 6m RGB led strip 5050
200 RGB 12 diodes
i want to connect the 6 meters strip as 6 peices of 1 meter toward the center like a flower with petals then round and round the diodes
how to i wire then together to meet in the middle to the power strip
 

bertus

Moderator
Nov 8, 2019
3,882
Joined
Nov 8, 2019
Messages
3,882
Hello,

Does the ledstrip have controllers on it?
Here is a picture of a piece of ledstrip with a controller:
20261119_151622.jpg

Bertus
 

Crafts4Me

Feb 10, 2022
175
Joined
Feb 10, 2022
Messages
175
sorry i cannot upload photos it looks like yours but with 4 copper dots a + then GRB
i have 5 meters 4 pin wire i also have 4 pin rgb male female connectors
how do i connect a- the 6 separate meters of RGB strip to one central point (like spokes of a bicycle)
B_ the RGB diodes to the strip or to the main powe supply
 

bertus

Moderator
Nov 8, 2019
3,882
Joined
Nov 8, 2019
Messages
3,882
Hello,

As I understand, the ledstirps do not have controllers on them.
Then I would connect them as in the following diagram:
Controller to ledstrips.png

Bertus
 

bertus

Moderator
Nov 8, 2019
3,882
Joined
Nov 8, 2019
Messages
3,882
Hello,

I posted a kind of wiring diagram with 6 blocks for the ledstrips and 1 block for the controller.
What are you using to access the forum?
I can see the picture on my phone , tablet and pc.

Bertus
 

bertus

Moderator
Nov 8, 2019
3,882
Joined
Nov 8, 2019
Messages
3,882
Hello,

On the ledstrip there are likely current limitation resistors for each RGB-led.
The mini RGB-leds will also need those current limitation resistors.
Can you see those resistors on the ledstrip?

Bertus
 

Crafts4Me

Feb 10, 2022
175
Joined
Feb 10, 2022
Messages
175
hi
this is my design 1795107201029.pngeach of the 8 arms will have about 3/4 meter RGB strip then base will have the 200 diodes all wires at the end must connect to the top where the transformer will plug into the ceiling outlet
how would i connect all the strips and lamps in a neat way
 

Crafts4Me

Feb 10, 2022
175
Joined
Feb 10, 2022
Messages
175
the led RGB and WW diodes are pre-wired 12v all i need is to connect them to each other and then to power source
 
Top