Search results

  1. russwr1

    Large Rectifier Pass Over Voltage In Reverse Bias ,- Not Fail Over Time?

    Can a large amperage stud diode as standard type low frequency, on series MILLIAMPS current, pass properly a much way higher over voltage in reverse direction , reverse bias, repeatedly as high frequency source, and not fail over time? I thought only overheating by large current failed diodes...
  2. russwr1

    How To Change Negative Volts To Useful Positive Voltage From A Pulse Discharge?

    Help wanted designing automatic circuit possibly with a separate switch, using directing diodes, blocking diodes, as zener or regular, for discharging negative charged capacitor OR Inductor coil, to resistor load with positive volts? Current passes through minimum initial 12v zener to charge...
  3. russwr1

    Leakage Inductance Useful??

    Is leakage Inductance Voltage Useful from 2 coils wound on same steel core? First is high volts in microamps with own circuit, 2nd is low volts with current in amps. The 2nd line needs over 100v. The first line doesn't short across, but passes normal volts in pulses down it's circuit and leaks...
  4. russwr1

    Mystery Wires Connection - Electromagnet from 2008

    What is this stranded copper wires thing sticking out from black electrical tape? Comments needed. I thought it was a THIRD wire going to resistor to ground to operate battery DC electromagnet, that was snipped off. A wire cut usually cuts through insulation + wire same time. A connection has to...
  5. russwr1

    Can electrolytic capacitor be increased in volts by using pulses in series?

    Can electrolytic 1uf capacitor be greatly increased in voltage, to over 100v, (like a boost converter), by half wave pulsing DC 35v going in SERIES through diode, l inductor coil, diode, l inductor coil, and diode to capacitor, without using DC resonant pulse charging? The off time allows for...
  6. russwr1

    How to increase high voltage from ignition coil using diode + inductor?

    How to increase high voltage from ignition coil using diode + inductor Ignition coil is not AC output. Therefore a voltage doubler can't be used. Pulsing DC output high voltage, was reported in 2008 to have been increased using diode + Millihenry...
  7. russwr1

    Two Spark Gaps In Series?

    Great! Now one more thing,- It just seems to me, that If the positive high volts fires first gap as wide, and 2nd gap to ground is narrow, and in series, doesn't the final spark gap fire at same high voltage as first? The first gap has to fire to GET to the second gap to ground, and both points...
  8. russwr1

    Superposition circuits principal?

    Can a high internal resistance 9v battery be applied in parallel to 3vDC battery D cell amps pack to run a 10 amp 6V DC headlight bub at full brightness? Neither source power by itself can run bulb. Superimposed 2 sources to operate load bulb resistance? 9 volts DC added to separate power pack...
  9. russwr1

    Can ignition coil voltage be increased? How!

    Magneto fired ignition coil is not AC input, as being a single pulse transformer. It fires in milliseconds range. (not fast microseconds range of CDI) How to get the output increased in voltage?????? It is not AC output , and cannot use diode/capacitor multiplier like an AC transformer does. I...
  10. russwr1

    How to get higher, high voltage from ingition coil?

    Magneto fired ignition coil is not AC input, as being a single pulse transformer. It fires in milliseconds range. (not fast microseconds range of CDI) How to get the output increased in voltage?????? It is not AC output , and cannot use diode/capacitor multiplier like an AC transformer does. I...
  11. russwr1

    Dr. Clark Zapper pulsing DC Therapy information needed?

    The Dr. Clark pulsing on + off DC ZAPPER unit is an electrical therapy unit from the past, and is still being sold. The other- Tens unit, is not a therapy unit. It only reduces pain in patient for short period. As from reading information about Zapper, it seems the values of 30,000 cycles usage...
  12. russwr1

    Better Use For Capacitors

    Has any one investigated the use of quality capacitors as polypropylene types with very low ESR? The 2 Energy Conserver manuals published years ago by Eagle Research say that the capacitor is NOT an electrical load and is a storage vessel for electrons . A pre charged battery is unstable and...
  13. russwr1

    How To Discharge Positive Volts Build Up On Object Without Method Of Ground Wire And Resistor?

    Comments needed on how to discharge low voltage positive charge on object (not static high volts) , by means of negative output miniature power supply of 5 volts passing through cathode of diode? Does opposite side of conductive object require a completed circuit such as a capacitor and wire...
  14. russwr1

    How To Discharge Positive Volts Build Up On Object Without Method Of Ground Wire And Resistor?

    Comments needed on how to discharge low voltage positive charge on object (not static high volts) , by means of negative output miniature power supply of 5 volts passing through cathode of diode? Does opposite side of conductive object require a completed circuit such as a capacitor and wire...
  15. russwr1

    How to repair 3 boards not working. Auto spark meters using neon bulb.

    These three units are Snapon MT2700 high voltage test meters for measuring spark plug high volts using neon bubs with variable resistor. The pots were tested OK. There is small power circuit and led using input 9v battery. None of thre boards registers high voltage. One of 2 bulbs glows, at pot...
  16. russwr1

    Unusual Transformer Windings Ratio Problem. Tech comments Needed!

    I studied US Patent 3980053 vigorously years ago. I typed 2 pages of proof reading errors made by the Patent Examiners. Doing a recent review of my findings, the ratio of windings is lastly, still a problem. The main circuit is just a beefed up capacitor discharge ignition at 600watts, and used...
  17. russwr1

    Connecting 2 voltage sources power supplies together to same end load resistance, to increase final voltage.

    AI answer to question of combining 2 power sources together in the same time to electrical load, such as for instance firing spark plug as electrolysis with small electrodes requiring much higher voltage...
  18. russwr1

    Failures of Capacitors and diodes from over voltages applied??

    In general, diodes and capacitors in circuits fail because of overheating. If ignition coil high volts is applied as in milliseconds pulses of 24kv, would the 1kv devices still function? There is no heat from high voltage wires. Needing suggestions for Isolation. (Not wanting high voltage diodes...
  19. russwr1

    Is crossover Leakage Induction Voltage useful In An Adjacent Power Circuit Line ?

          A Power Circuit from 2008 showed high voltage line with its 5 turns coil wrapped with 7 turns coil  from the low volts line with amps. Core steel rod was not under the low volts coil as electromagnet.  There is a 90-120volts of crossover...
  20. russwr1

    Is crossover leakage induction voltage useful in ADJACENT circuit line?

    A Power Circuit from 2008 showed high voltage line with its 5 turns coil wrapped with 7 turns coil  from the low volts line with amps. Core steel rod was not under the low volts coil as electromagnet.  There is a 90-120volts of crossover leakage induction volts transferred to 7 turns and is to...
Top