Search results

  1. felto

    CRT monitor

    You know that noise that comes on when turning on the monitor
  2. felto

    CRT monitor

    Ok I get  squelching noise when I turn the monitor on but no LED light.  I also do not get anything on the screen. Let me know if you can help thanks
  3. felto

    CRT monitor

    That part no. is from the working monitor as for the non-working one the part no. is C5302 I checked the diode test from C-E junction and it get a reading of about .4 volts Is there another test from another junction that I can hookup my meter to?
  4. felto

    CRT monitor

    The Horizontal Output Transistor from my old monitor is part no.  DE9704
  5. felto

    CRT monitor

    I have another monitor that has one can I just swap to into this one.  The part no. is different and I dont know if these things are interchangeable. Will that work?
  6. felto

    CRT monitor

    New York City The part no. for the HOT is C5302 hope that helps
  7. felto

    CRT monitor

    Whats a good site in trying to find a replacement for the Horizontial Output Transistor? thanks
  8. felto

    CRT monitor

    I forgot to ask  you on my last post. What value should I get when checking resistance on collector-emitter junction of the HOT?  Do I set the volt and the highest resistance scale?  Let me know
  9. felto

    CRT monitor

    Step down converter you say. Is that the same as the flyback transformer? Is there an easy way to check this part without disconnecting it from the board. As for the HOT what readings should I get out of it.  by doing the diode test I think getting the .6 volts is sufficient no?  What else...
  10. felto

    power on the usb frm pc!!!

    Go into your systems settings of your control panel then click where it says usb ports and you will see the current supplied for each.  I thing it was between 450 and 500MA
  11. felto

    CRT monitor

    It is a Sony monitor and I dont remeber the model no. I do hear it making a sound when it is turns on. The LED power light does not come on when I power it up.  The screen remains blank when I power it on.  As for the output transistor I do get a .6 volts across collector and emitter when...
  12. felto

    CRT monitor

    My computer monitor just went on the frizzs. So I decided to open it up and investigate. I do not see the obvious burnt component and also checked out the fuse if it was burnt. I put a voltmeter on the output transistor and I get around .6 volts which tells me that it is probably good.  Can...
  13. felto

    220V to 110V

    Can you tell me what site I can  find this step up transformer? Do I just wire it into the other transformer?
  14. felto

    220V to 110V

    ok upon further inspecting the unit it says that it uses 250V and 1 amp.  So where do I go from there? It looks as if the transformer is part of the whole unit and it cant be replaced.  Can I add something within the circuit to let it run at 110V.  Maybe a power transistor or...
  15. felto

    Repairing circuit board

    instead of doind all that why dont you just run jumper wires to whatever part of the circuit it was hooked up to.  In other words where it was broken off just take the wires and solder them into the traces where they were connected or find a junction point and solder it there.
  16. felto

    220V to 110V

    Can you tell me what readings are you looking for on the tranformer?  I have the unit disassembled and the tranformer is exposed.  Where do I hook up my voltmeter and do you need volts, amps or what? Thanks
  17. felto

    My Lab

    Pretty neat labs you guys got there Have you guys actually repaired anything in these labs?  All i see are broken parts hanging around
  18. felto

    220V to 110V

    Thanks for the reply It says that its at 1ma current and I think 140 watts of power.
  19. felto

    220V to 110V

    Hi I just would like to inquire about a coffegrinder that was given to me from europe.  The plug on it was not the standard 110V supply so I changed the plug on it to suit my outlet.  Now it still grinds but the problem is that it runs slower.  I think I need to change the transformer or...
  20. felto

    Need help in fixing lexmark printer

    I checked the power supply already with a voltmeter and it checks out ok. I get 30 Volt output which is what it calls for. Something on the board itself burnt out. I think it may be the voltage regulator on the board. Lets hope that is it. It a 7812CT version made by Motorola. I just...
Top