Search results

  1. T

    Driving 740 LEDs with variable intensity

    Hello, You need to control all leds together or you must be able o change each led? The first is easy. Actually you have several possibilities, from custom DC/DC controller to using of standard LED controller you can see this type of controllers from TI Company. You must know that the White...
  2. T

    pls help me regrading microcontroller

    Hi, what exactly you need? About the project, this is a simple and easy to realize. Because you have RS232 I hope you need only two point connection, because multi point with RS232 is a bit difficult. First think is to get a decision what type be a protocol of communication, master/slave or not...
  3. T

    ultrasonic radar

    What you need to do, you need radar to determinate the object position and distance to, or just to calculate the distance?
  4. T

    RGB led driver/controller

    If you still look for company that is able to design this for you pls send me a PM. Below you can find  similar product with a 3x3W white led’s
  5. T

    Please help in the MOSFET driver

    Hi, This chip is MOSFET driver, not a motor driver. The mosfet haven’t the gate current, this 3A impulse is only from the capacitance between gate and Source. What type of motor you will drive?
  6. T

    help me create a racing timer

    Hi, This is to same like a laser device. Laser device is better, because the light ray is more coherent, and will be an easier to obtained big distance. The problem their can be the noise, from son, from lamp, from headlight. To reduce this signal you must use a more intelligent sensor. If you...
  7. T

    need Sim Software ?

    I not sure that you need a model for the processor, and I am not sure that Intel can provide some model. They has internal model, but they is not suitable for the PCB design. Actually you no need from this model. Only one that you need is a good PCB soft, in your case the best decision is a...
  8. T

    help me create a racing timer

    HI, IR optical barier is very suitable. Way you think that F1 timer is expense, in this timer have not nothing special. You can do this very easy. What you ant to create, or how. You want to use standard device, like a sensor, timer etc and just connect them, or you want to make the timer and...
  9. T

    Conveyor Belt

    Hi, you can made different construction. The traditional conveir belt is a one or two draving wheels, depend from this one or two direction is movement, and several secondary wheels between them. The belt can be set in motion with friction or with cogwheel. In your case i think you can use...
  10. T

    PCB Etching Tank - Do it yourself

    Hi, presured air, from compresor, via reducer, in compresor tank the presure is around 6 bar, after reducer valve the presure is below 1 bar. But now i think taht temperature of air can be higir that room temperture becouse the compresion, and this may be is a reson for the voaporation.
  11. T

    circuit design

    Hi, look at this topic : http://www.electronics-lab.com/forum/index.php?topic=6246.0
  12. T

    op amp response time

    Hi, nobody .....  to get the answer must have a question. Type of the OPAMP, and signal, for example LF411 : Inverting Small signal ~ 200 nS Non Inverting Small signal ~100 ns Inverting Larg signal ~ 1.8 uS Non Inverting Large Signal ~ 1.8 uS Curent Limit Mode ~ 10 uS
  13. T

    PCB Etching Tank - Do it yourself

    Hi, the MP is right, the fericloride is saffety. About the ventilation, i has in the pas thank with aeration, and can say taht aeration increase the voapours.
  14. T

    Data Transferrinf Over a 25 Meter Wire.

    Hi, the RS485 is very good decision. Afcourse you can use CAN but if you have not a controller with a can module will be a needless work.
  15. T

    Data Transferrinf Over a 25 Meter Wire.

    Hi, if this is only one way connection, you can use the RS232 with a current loop, or RS422. If you whant a real multi node network, then RS485. If you want something a bit hi-tech you can use a low speed optics, HP has a this type of trancivers, actually this is the agilent, a HP company.
  16. T

    nonvolatile memory devices

    Hi, you whant to know what type of NVRam you can use, or you have specific question to some technology. Some producer, like a Dalas-Maxim has a NVRam on chip, with integrated battery. The motorola, and some other producers has a magnetic ram, this is very good decision. You can lok for a MRAM...
  17. T

    power trouble

    Hi, why you used a standard PC board, why you dont use some industril on board PC. Many of them use only 12 or 12 and 5 V. Something like a Arbor EmCore 615, this is Via based PC. Has a many other company that produce this type of board, they is not very big, used only one power suuply, n some...
  18. T

    PCB Etching Tank - Do it yourself

    Hi, I don't know where in the US you can buy this, has a different company that have a catalog for the chemical, but i don't know how you can by something from them. And they price is higer, becouse they material is very clear for laboratory analysis. I know that H2O2 is used in pharmacy...
  19. T

    PCB Etching Tank - Do it yourself

    Hi, did this is a etching tank with a pressure air ? If this is it, then not only the heat well be a problem, heat will increase the temperature, and this will increased the evaporation. But the pressure air will have a more strong effect in this direction. You must have a very good ventilation...
  20. T

    Strange behaviour of 78xx reg.

    Hi, mm yes i Living in Vegas, but my native language is not English, i am from Bulgaria, and actually 7 months ago my english was like your Bulgarian language :) I use Bulgarian dictionary. About the language, i know that my english is not good, i try to improve it. But the syntax error very...
Top