Search results

  1. S

    Hiss Sound

    yes its a good one No, Its on my guitar onboard Yes, because on the other guitars the hiss sound is not there when i Touch it..(with my shoes on) but in this guitar the sound reduces (with my shoes) and there's nothing when i touch the ground with my bare foot no, Not much...
  2. S

    Hiss Sound

    i built a preamp equa circuit for  a bass guitar the specs and circuit is shown below I had some problems in the begin with clipping and all...!and its good but there is a hiss sound (earth problems) when i touch the ground the hiss is no more but no one plays the guitar with bare foot... ...
  3. S

    Free sample chips!

    I've got the Chips from Texas instruments www.ti.com any site for led's and POT's
  4. S

    Any free a samples for Potentiometer

    I agree to you....! But the pot what i get here near my place are not of good quality... Is there is any part..cular site for the same...
  5. S

    Any free a samples for Potentiometer

    Is there is any free sample site for switches and Potentiometer (esp..ly
  6. S

    Help for Guitar Control

    Almost all the problem was solved Thanks but only the hum is there in the End, like when i turn off the battery.                
  7. S

    Help for Guitar Control

    yes its more than 1.1 like for some times its like for the whole time the battery is on.. the opamp did not heat up...
  8. S

    Help for Guitar Control

    The 22k resistors charge the 100uF cap in only 1.1 seconds after the battery is turned on. Lesser values will be quicker but it is quick enough now. If the values are 10 times higher then there will be crackling at the beginning for 11 seconds. Is there crackling if you play softly?
  9. S

    Help for Guitar Control

    Thanks If i subtitute the MC1458, or LM358
  10. S

    Help for Guitar Control

    I Checked these value using multimeter it was OK... can i Try lesser value for (22 k resistor ) ? and the capacitor like 50uF. Will try the the other IC's
  11. S

    Help for Guitar Control

    Thanks for your prompt reply ... Cracking, or breaking of sound and I checked for the battery (its brand new one)
  12. S

    Help for Guitar Control

    I Built the circuit for Guitar Control (http://redcircuits.com/Page69.htm) i Wanna use it for my Bass Guitar. and it works fine... but there lots of clipping...(the breaking and cracking noise) mostly in the beginning... I checked all the connections and all the POT's but still the Clipping...
Top