Search results

  1. K

    0 to 5V to 4 to 20mA

    Wow! Thanks Harald! This seems to be a circuit par excellence!!! I will go thru it and get back with further comments shortly.. Many Thanks!
  2. K

    0 to 5V to 4 to 20mA

    Excellent explanation Harald, and thanks for the drawing that indeed was quite nice! But I have a question, Lets says my circuit takes only 1.2mA for its operation what to do? how do I manage the remaining 2.8mA?
  3. K

    0 to 5V to 4 to 20mA

    I'm sorry I didn't understand that why I didn't need a second current source?
  4. K

    0 to 5V to 4 to 20mA

    Wonderful suggestion. I will try this out.
  5. K

    0 to 5V to 4 to 20mA

    Generally speaking the load would be 250ohm so you would get 1V for 4mA and 5V for 20mA, but I would like to make the circuit to work suitably upto 1000ohm load. The supply voltage is typically 28VDC. I'm sorry I didn't understand your comment about the ground requirement, yes the ground...
  6. K

    0 to 5V to 4 to 20mA

    I want to power the device from the current loop, so I have to ensure that circuit current is within the 3.5mA range.
  7. K

    0 to 5V to 4 to 20mA

    Could it be possible with the load being connected to ground?
  8. K

    0 to 5V to 4 to 20mA

    It seems that the op-amps in that circuit are powered by 20V + , I would like the op-amps to be powered by 5V and only the output transistor or mosfet to be powered by 24Vdc.
  9. K

    0 to 5V to 4 to 20mA

    I am generating a 0-5V signal from a PWM and need to convert it to 4 to 20mA, I tried a few circuits that I found online but it does seem to work as I thought it would. These circuits generally give 0 to 20ma output. What I was looking for is 4mA for 0V input and 20mA for 5V input.
Top