Search results

  1. Tinker Unique

    4017 IC

    What I meant by "out of the box" has nothing to do with being superior or arrogant. I was referring to "out of the box" as being different and unique ( NOT ordinary) I like things a bit different , like making lighted ash trays... OR making a teeter totter for a couple lighted snowmen...
  2. Tinker Unique

    4017 IC

    There is NO intent to do anything abusive, immoral, or illegal. I have wanted to finish this "project" for over a year. Finances have been a bit strained and I'm just asking for more specific info on parts/components needed. I have a schematic on the original plan, and am trying to confirm the...
  3. Tinker Unique

    4017 IC

    Am familiar with the "dimpled" LED's and the broadcast light. Have found them (4.5 v DC) at places like Michael's and Hobby Lobby - powered by 3 AA batteries. Also know that 12v. LED's (Christmas & regular) can be found at many truck stops. The "inverted cone" can also be made with a Dremel...
  4. Tinker Unique

    4017 IC

    Hobby project = I have a sequence blinker in mind and have the 555 IC, and need to get a 4017 controller, Also wanted are 12v "micro-lights" to power the project or LED's that broadcast light instead of 'narrow beam'. Since Radio Shack is no more, where can I get such lights ? Will need a dozen...
  5. Tinker Unique

    I'm looking for 12v. LED's in red and yellow that cast light like a regular bulb.

    I'm wanting to use a series of them in a project started. The areas are small and about 3/8" deep, and irregular in shape. The shapes are 1/4" to 1/2" wide and from 1 1/2" to 3"long. The LED's are to be centered and I would like each 'area' to light up with an LED. I do not want to use small...
  6. Tinker Unique

    I'm looking for 12v. LED's in red and yellow that cast light like a regular bulb.

    I'm making a "project" and I want to find LED's that cast light like a regular bulb, and not just a 'spot'. I've tried to use my Dremel to "dimple" the top of LED's and that works, but I want to light an AREA. I used to be a regular Radio Shack customer, but they're gone. Any help appreciated.
  7. Tinker Unique

    Boxes. Cases. I need simple coverings for my projects! What do you use?

    Small boxes might be made out of plastic soap "boxes" used to keep bar soap in your suit case when travelling. You can also make them "custom" out of styrene plastic sheets purchased at a local hobby store. A bit of silicone where the electrical leads go thru will stop the 'wet', and maybe a...
  8. Tinker Unique

    LED supplier ?

    Since Radio Shack closed, I'm looking for an LED supplier. I use low power LED's for 3volt hobbies, and occasionally 12 volt projects. Also have a supply of various resistors to 'adapt' amperage. Would like a local supply (Kingsport, TN) , but mail order will do.
  9. Tinker Unique

    Bicycle gadget

    There are several components available on the market that do what you want, but to build the 'system" I might suggest an LED flashlight and a small LED taillight from a car. The 'gyro' will need a small motor to keep it spinning and a "trigger" to switch the buzzer when it moves off the preset axis.
  10. Tinker Unique

    DC Curent and Voltage regulation.

    Years ago, I saw a "Power Pump" in a CB magazine and the plans to make one. It was a 'plug-in' that converted 110 VAC to 12-13 VDC with a rock solid output. There was an option to see just how many amps was being used when the CB was being used. The specific voltage could be controlled by a...
  11. Tinker Unique

    'Chasing' LEDs

    NOT sure about the solutions suggested. I have no problem with them, but might suggest getting the "sequencer" from a junk yard - off of another car with the sequencing lights. May be a bit easier and work like it should.
  12. Tinker Unique

    Drill bits for homemade PCBs?

    The "setup" I would use, is my Dremel rotary tool and the drill press made for it. Very slight pressure. Bits I use are purchased at a hobby/craft store like Hobby Lobby or Michael's. The Dremel is the "power tool" that I use most often. There are other "attachments" for it, like the router, and...
  13. Tinker Unique

    Adding LED lights to Kid Battery powerd Ride-on

    Tractor Supply, and others, have LED "utility lights" that are good for farm equipment. ANY auto supply may have the LED lights that get used as clearance lights on trucks and trailers, and they have the "utility lights" truckers use behind the cab so they can see for hooking up the trailer at...
  14. Tinker Unique

    LEDs on cars license plate frame

    An inline resistor should work. Might take a bit to find the "right one" that works best for what you want.
  15. Tinker Unique

    Heating elements for own built terranium

    Possible solution = 110v "heat-tape" used to keep water pipes from freezing during the winter. Sold in most Hardware stores. Can be "woven" around on the bottom ( like an electric blanket) of the terranium below the soil/sand. OR go to a commercial greenhouse ( supplier) to find out what they use.
  16. Tinker Unique

    How to increase range of IR Emitter

    NOT relevant to this issue, but for another system.... A set of lenses from a pair of binoculars will increase the range of the receiver. ( sometimes found at Goodwill, or ?) Can be used as an intrusion alarm.
  17. Tinker Unique

    Car Battery Powered House Ideas, Questions

    There are quite a few options and companies available for what you are looking for. Example = LARGE motorhomes are run on 12v power WITH an inverter to supply the range and other items. One of the companies that can give you answers is "Seimens". They make the supplies to build a complete...
  18. Tinker Unique

    Need a little help on circuit for 120VAC to 12VDC

    Some years ago, a CB radio magazine posted a plan to build a "Power Pump" that would have a STEADY 12.8 DC voltage from 110 AC voltage. I made one and it was used to power a mobile CB radio as a base station in the house. There was an option to install a meter on the front of the box to view
  19. Tinker Unique

    Where to get a 4017 chip

    With Radio Shack closing down, where can a person get a CD4017B chip ? I'm making a chasing LED's project and need that chip and a few 12v LED's to finish it.
  20. Tinker Unique

    Small generator from motor

    What I had in mind is using a small 12v motor, and use it as a generator if possible. I can use an electric window motor, windshield wiper motor or a heater fan motor. IF the motor can also be used as a generator. OR, does it need to be re-wound or modified in some way. Light "research" says...
Top