Search results

Search Forums New Posts
  1. C

    fan doesnt specifically say waterproof can I use it anyway?

    hi you have given me advice on my model building regarding the reptile humidifier i have rebuilt it all to be "waterproof" all the lighting was changed to waterproof 12v light i "waterproofed" the walls and floor the pot bubbles using a tiny fishtank aerator. i wanted "steam" for my pot but...
  2. C

    revolving chandelier with a way to plug in led strips

    hi i am still trying to do this and not succeeding my hut is a sukkah. i do all the decorations on my own. i made a new crown, it weighs between 5-7 lbs i wired it with 12v lights it has an adaptor to 220v i need this crown to revolve please help me design a "DIY rotating tree stand 220v" using...
  3. C

    revolving chandelier with a way to plug in led strips

    i am sorry i am coming back to this i have my crown, 2 feet x 2 feet lit with led lights rgb strips and individual mini lamps all 12v maybe 10 pounds weight at most i would like it to revolve please advise what i need with motor and slip rings i need it to be cost effective please advise tahnks...
  4. C

    tiny 12v fan for my miniature models to exhaust humidifier vapor/misthi

    hi this is a very small model there is no chimney it is like an old fashioned roo a rectangle 10 inches high x 10 inches deep by 8 inches wide top of pot about 5 inches smoke about 4-5 inches from the foor it is proving to be too big of a "dream" for me to enact and create i think i will move...
  5. C

    tiny 12v fan for my miniature models to exhaust humidifier vapor/misthi

    it is very slow yet still doesnt exhaust
  6. C

    tiny 12v fan for my miniature models to exhaust humidifier vapor/misthi

    it shouldnt need more than2 but i will use 3 amp on fast speed it doesnt exhaust at all the fan on slow exhausts only when the "smoke" pipe is right in front of it my exhaust is mounted on the "roof" building is all f about 10-12 " tall smoke pipe is at 4 inches from the floor and there is not...
  7. C

    tiny 12v fan for my miniature models to exhaust humidifier vapor/misthi

    hi i have a motor speed adjustor it slows it down i need to test it today i will report after i did so i am using a 2am transformer it is getting warm with use do i need a 3 amp? my application needs to run for 12 -15 hr stretches
  8. C

    tiny 12v fan for my miniature models to exhaust humidifier vapor/misthi

    i am using 12v as that is the rest of my display
  9. C

    tiny 12v fan for my miniature models to exhaust humidifier vapor/misthi

    all the fans are much too large i need this size the speed adjustor makes it much slower i need to refill and test the vaporizer again i will report tomorrow
  10. C

    tiny 12v fan for my miniature models to exhaust humidifier vapor/misthi

    with a motor speed adjustor? it is spinning very fast and is very noisy https://he.aliexpress.com/item/1005005281241829.html?spm=a2g0o.order_list.order_list_main.115.5aa71802OdDmf8&gatewayAdapt=glo2isr
  11. C

    tiny 12v fan for my miniature models to exhaust humidifier vapor/misthi

    there is only 1 way to wire otherwise it wont work there is a + and - thats it in my application mini rooftop i have the fan in backwards menaing outside it blows cool i thought it would exhaust the vapor from inside and it does not
  12. C

    tiny 12v fan for my miniature models to exhaust humidifier vapor/misthi

    https://he.aliexpress.com/item/1005006103073146.html?spm=a2g0o.order_list.order_list_main.35.5aa71802OdDmf8&gatewayAdapt=glo2isr
  13. C

    tiny 12v fan for my miniature models to exhaust humidifier vapor/misthi

  14. C

    tiny 12v fan for my miniature models to exhaust humidifier vapor/misthi

    hi i purchased the tiniest 12v wayterproof fan 1" x 1" most of my house fans on the other side act as an exhaust this one doesnt seem to exhast. is there anything i can do to it to create the exhaust function...
  15. C

    tiny 12v fan for my miniature models to exhaust humidifier vapor/misthi

    the smaler ons are not waterpproof this si the smalles waterproof one i found in areasonable price as a test lets see i will report back house is 10" tall 8" widex 7" deep thats very small
  16. C

    tiny 12v fan for my miniature models to exhaust humidifier vapor/misthi

    thanks i ordered a 3" waterproof fan nd will mount inside the chimney to blow out lets see if it works as i imagine
  17. C

    tiny 12v fan for my miniature models to exhaust humidifier vapor/misthi

    hi i need a 2-3 " fan mounted in my house thats about 10" the vapor is directed to appear coming out of the pot however it pools and makes everything wet i want to add a fan to my chimney to pull the vapor up is that possible?
  18. C

    tiny 12v fan for my miniature models to exhaust humidifier vapor/misthi

    my models are all 12v and on a 1:12 scale i have a retile humidifier from the back to add "steam": from my boiling pots i need some type of mini fan to ehaust the "steam" through the "chimney" any suggestions it needs to be really small and 12v
  19. C

    3v step down from 12v

    o this on will work alos? usb female port i think its the first choice...
  20. C

    3v step down from 12v

    hi my adaptor is 3amps which i believ should be sufficient the bubbler is 5v 1A-1w i have about 15 mini Led light a 12v mini motor maybe 30ma
Top