Search results

  1. AxG

    Stuck! I changed the belt on the dymo disc painter and put it back together, it turns on but won’t move

    Yes it does , if i don’t put the nut into it’s slot the tray will move back and forth freely , but also if the motor has insufficient torque why is it only a problem now and not before? because when i first got the printer the tray would move back and fourth just fine. and no the nut doesn’t...
  2. AxG

    Stuck! I changed the belt on the dymo disc painter and put it back together, it turns on but won’t move

    Hi! Sorry school had me busy so I didn’t have time to work on my machine, but anyways I was messing around with it some more and I found what I think is the exact problem. I did some research and I found that the problem is the Trapezoidal Threaded Nut aka The small black thingy with the hole in...
  3. AxG

    Stuck! I changed the belt on the dymo disc painter and put it back together, it turns on but won’t move

    Thanks! Is the model number the same as the serial number? because the serial # is 93448-0004354 The belt is aftermarket, i got it off amazon https://a.co/d/b05hJa4 ^ link! I bought this online and it didn’t come with the manual but i did look at the manual online and it wasn’t of any help...
  4. AxG

    Stuck! I changed the belt on the dymo disc painter and put it back together, it turns on but won’t move

    i took it apart, here’s some pictures, it looks the same way it did when i was taking it apart before so i don’t think i broke anything? also, is there a shop i can take this thing too to get it fixed ? i don’t know what something like that would be called, i tried looking for a small shop that...
  5. AxG

    Stuck! I changed the belt on the dymo disc painter and put it back together, it turns on but won’t move

    i unplugged it and tried plugging it in the other direction but it wouldn’t go in so i don’t think that’s the problem, someone else said something might me jammed so i’ll just try taking it apart and putting it back together and see if that fixes it. thanks !
  6. AxG

    Stuck! I changed the belt on the dymo disc painter and put it back together, it turns on but won’t move

    The video was crystal clear to me and my camera stayed focused the whole time so i think that’s just something on your end? even when i click the link and watch it the video is good for me, no unfocused camera or whatever so.. maybe i went too fast for you lol. and ok thanks for the advice
  7. AxG

    Stuck! I changed the belt on the dymo disc painter and put it back together, it turns on but won’t move

    It might be but i tried doing it both with and without the screw and it had the same problem , i did do a belt replacement as a i mentioned before maybe i made a mistake putting it back together? here’s a video if needed https://www.kapwing.com/videos/6531600334c9150bbb132506
  8. AxG

    Stuck! I changed the belt on the dymo disc painter and put it back together, it turns on but won’t move

    Ok! I did that but it’s moving at all, i can’t move it backwards manually unless that part i highlighted in yellow is taken out , here i’ll just make a video so it’s easier to show! https://www.kapwing.com/videos/6531600334c9150bbb132506 The machine did a loud WHHIRRR again , like something is...
  9. AxG

    Stuck! I changed the belt on the dymo disc painter and put it back together, it turns on but won’t move

    Ok! So basically I am a complete novice when it comes to these things because i’ve never done this before, but how hard could it be to take something apart and put it back together right ? :D Since this machine is so OLD there is 0 information about it online so that’s why i’m here :( anyways...
Top