child lock on sharp VCRS

[Eric]

Does anyone know how to disable the child lock on a sharp VCR were the
PINumber has been forgotten?

 

[nvic]

usually four zeros

 

[Eric]

thanks for that nvic
Sorry I never got back to you
I was tring to help someone else out and they have not got back to me

I had a few other, I fiind via google, but it appears they did not work

VCM26
Child lock removal (pin no n/k)
Press & hold lock key on r/c - lock symbol then displayed, Press & hold
st/by on r/c & front of vcr for 3 secs. VCR will shut down & clear child
lock


Simultaneously press the standby buttons on the
front panel and the remote control.


VCMH67
Childlock removal when PIN not known
Press "Childlock" on R/C - when display changes to 4 dashes waiting for
correct code press St/by on R/C & front panel together



usually four zeros

 

[Eric]

thanks for that nvi
Sorry I never got back to yo
I was tring to help someone else out and they have not got back to m

I had a few other, I fiind via google, but it appears they did no
wor

VCM2
Child lock removal (pin no n/k
Press & hold lock key on r/c - lock symbol then displayed, Pres
& hol
st/by on r/c & front of vcr for 3 secs. VCR will shut down
clear chil
loc

Simultaneously press the standby buttons on th
front panel and the remote control

VCMH6
Childlock removal when PIN not know
Press "Childlock" on R/C - when display changes to 4 dashes waitin
fo
correct code press St/by on R/C & front panel togethe


usually four zero

 

[nvic]

try unplugging? (after unplugging, wait at least one hour). Also, what
is the feature called? Also, what model is it? Please let me know, nvic

 

[nvic]

I tested other ways of removing the child lock from sharp VCRs. The
four zeros, i also was able to get it to un set via unplugging.
sometimes, you can't remove the child lock with these methods. Is the
child lock called "Tamper Proof" and is there a key symbol in the
display? If so, check the manual for this info (troubleshooting
section). Please let me know, nvic

 

[Gerard Bok]

I tested other ways of removing the child lock from sharp VCRs. The
four zeros, i also was able to get it to un set via unplugging.
sometimes, you can't remove the child lock with these methods. Is the
child lock called "Tamper Proof" and is there a key symbol in the
display? If so, check the manual for this info (troubleshooting
section). Please let me know, nvic

My Sharp VCR unlocks when the play button is kept depressed for 5
or more seconds

 

[Eric]

Is that on the VCR or the remote?





My Sharp VCR unlocks when the play button is kept depressed for 5
or more seconds

 

[Gerard Bok]

Is that on the VCR or the remote?





My Sharp VCR unlocks when the play button is kept depressed for 5
or more seconds

Sorry. I have to correct my earlier reply.
I went to test your question and found out, that my Sharp does
not unlock on '5 seconds play'. (Akai will though

Sharp has a 'key'-key on the remote control only.
The manual says, that pulling the mains plug for an hour or two
will reset the child lock.

 

[Eric]

On one old set (can not remember the make, model) I removed the back up
battery


Once I even took out the EEPROM and saved it to computer file, cleared it,
then put the EEPROM back, I think from memory it worked.

Is that on the VCR or the remote?





My Sharp VCR unlocks when the play button is kept depressed for 5
or more seconds

Sorry. I have to correct my earlier reply.
I went to test your question and found out, that my Sharp does
not unlock on '5 seconds play'. (Akai will though

Sharp has a 'key'-key on the remote control only.
The manual says, that pulling the mains plug for an hour or two
will reset the child lock.