Xformermike1
- Sep 16, 2012
- 2
- Joined
- Sep 16, 2012
- Messages
- 2
Sorry I worded that wrong because I'm so green behind the ears... This probably makes more sense. Please pay attention tot his one.
I need to connect THIS...
http://www.pololu.com/catalog/product/1183/pictures
to THIS...
http://www.pjrc.com/store/teensy_pins.html
To control THIS on my computer...
http://www.aliexpress.com/store/product/NEMA17-48mm-1-8A-78-Oz-in-CNC-stepper-motor-stepping-motor/704350_517614158.html
I need to connect these. But I am unsure of how to wire the stepper motor driver to the USB controller in such a way that it works for the motor. Does anyone have any experience with this? If I were to buy a the stepper motor I need would it come with directions for how to wire a USB controller to a Stepper Motor Driver Carrier to make it work for the actual Motor?
Thank you in advance I greatly appreciate the help!
Mike.
I need to connect THIS...
http://www.pololu.com/catalog/product/1183/pictures
to THIS...
http://www.pjrc.com/store/teensy_pins.html
To control THIS on my computer...
http://www.aliexpress.com/store/product/NEMA17-48mm-1-8A-78-Oz-in-CNC-stepper-motor-stepping-motor/704350_517614158.html
I need to connect these. But I am unsure of how to wire the stepper motor driver to the USB controller in such a way that it works for the motor. Does anyone have any experience with this? If I were to buy a the stepper motor I need would it come with directions for how to wire a USB controller to a Stepper Motor Driver Carrier to make it work for the actual Motor?
Thank you in advance I greatly appreciate the help!
Mike.
Last edited by a moderator:
