Erik Hindborg
- Apr 5, 2017
- 1
- Joined
- Apr 5, 2017
- Messages
- 1
Hi All
I've salvaged this panel from a HP M3027 Laser printer in order to use it for an cnc I'm going to build.
Unfortunately I haven't been able to find any specs for the LCD
It has an 30 pin orange soft connector strip, which I think is for the displaty and a smaller connector for the touch panel placed in front of the lcd. Lastly there is an stepup voltage prop. from 5v to 12 v which is connected to the display.
I've trawled the net with negative result - no one seems to have any info.
so - right now I will be very happy for any info that might be of use.
/Erik
I've salvaged this panel from a HP M3027 Laser printer in order to use it for an cnc I'm going to build.
Unfortunately I haven't been able to find any specs for the LCD
It has an 30 pin orange soft connector strip, which I think is for the displaty and a smaller connector for the touch panel placed in front of the lcd. Lastly there is an stepup voltage prop. from 5v to 12 v which is connected to the display.
I've trawled the net with negative result - no one seems to have any info.
so - right now I will be very happy for any info that might be of use.
/Erik