I purchased this in kit form a while back, and actually got it working. But then one day I found a couple of wires had come off the circuit board, and when I tried to resolder them onto the pcb it overheated and damaged one of the copper traces. I tried to get the seller to help me, but he told me that he could not, because he was travelling. So since a couple of years ago I have not been able to use this device, and due to health challenges with which this could have been useful, I really need this working. I am enclosing the manual in .pdf format, along with various photos showing the circuit with my attempts to colour the traces, and the rest showing my terrible soldering 
.
I recently acquired a fairly good auto-ranging digital multimeter, so now I want to see whether I can get the device working again with your help, but in terms of finding the fault, I don’t know where to start.
. I recently acquired a fairly good auto-ranging digital multimeter, so now I want to see whether I can get the device working again with your help, but in terms of finding the fault, I don’t know where to start
.Attachments
-
Coloured tracks flipped#2.jpg -
Bob Beck soldering manual by Bozidar Grilc.pdf
-
Bob Beck - Schematic Electrifier - Parts List.pdf
-
Combined component and coloured tracks#1.jpg -
IMG_1997.jpeg -
IMG_1996.jpeg -
IMG_1993.jpeg -
IMG_1991.jpeg -
IMG_1987.jpeg -
IMG_1986.jpeg -
IMG_1985.jpeg -
IMG_1984.jpeg -
IMG_1983.jpeg -
IMG_1982.jpeg -
IMG_1998.jpeg -
IMG_2002.jpeg
