-
-
KKennyIII65 replied to the thread Arduino Nano built in RGB LEDs won't turn off.OK. I finally actually read the comments in detail and my issue is the LED_BUILTIN is active HIGH and the RGB LEDs are active LOW. The...
-
KKennyIII65 reacted to robertlunch's post in the thread Arduino Nano built in RGB LEDs won't turn off with
Like.
Most likely: the RGB LEDs are active-low, so you must set the pins to OUTPUT and write HIGH to turn them off. Leaving them unconfigured... -
KKennyIII65 replied to the thread Arduino Nano built in RGB LEDs won't turn off.That copy & paste dropped my indexes... A few missing..... ahh... Forum italicizing.....
-
KKennyIII65 replied to the thread Arduino Nano built in RGB LEDs won't turn off.I did.... Thanks... Here's Mine... /* Hook yo WiFi & Blinky */ #include <WiFi.h> const char* ssid = "WiFi Surveillance...
-
KKennyIII65 replied to the thread Arduino Nano built in RGB LEDs won't turn off.Well, after doing some more testing, I find if I turn on, say, the Blue LED and then turn it off, there is a background light of...
-
KKennyIII65 replied to the thread Arduino Nano built in RGB LEDs won't turn off.
-
-
KKennyIII65 replied to the thread Arduino Nano built in RGB LEDs won't turn off.ABX00083
-
KKennyIII65 replied to the thread Arduino Nano built in RGB LEDs won't turn off.I guess what might help is that I can't find the header files that define the values in cpp for the Arduino hardware. For instance...
-
KKennyIII65 replied to the thread Arduino Nano built in RGB LEDs won't turn off.The Arduino is powered by the USB C port. Stand alone....
-
KKennyIII65 replied to the thread Arduino Nano built in RGB LEDs won't turn off.Here is a markup of the schematic. LEDs circled are mounted on the Nano...
-
-
KKennyIII65 posted the thread Arduino Nano built in RGB LEDs won't turn off in Microcontrollers, Programming and IoT.Hello, Newbie here.. Trying to get used to using IO on my Nano. I can get the Orange LED to turn on and off, but the RGB LEDs will...
-
KKennyIII65 reacted to doc.cotton's post in the thread Looking for a starting point for Micro-controllers... with Like.
I am older than dirt sooooo. Start with 1 Arduino uno and the Arduino free user interface. Just know that the Arduino is 5 volts on the...
-
KKennyIII65 replied to the thread Looking for a starting point for Micro-controllers....Thank You! That's a great start!
-
KKennyIII65 reacted to danadak's post in the thread Looking for a starting point for Micro-controllers... with Like.
Cypress, now Infineon owned, has an extensive line of AFM based SOC's. Example part has all these resources, ,most multiples of whats...
-
KKennyIII65 reacted to Harald Kapp's post in the thread Looking for a starting point for Micro-controllers... with Like.
For wireless the ESP series og controlles is very well suited. For easy startes it can be programmed using the beginner friendly...
-
-
Loading…
-
Loading…
