Recent content by KJ6EAD

  1. KJ6EAD

    Arcade CRT monitor not powering up every time

    Most arcade game CRTs (monitors) were made by Wells Gardner or Electrohome. There are "monitor get well" kits available from arcade supply companies and on Amazon and ebay.
  2. KJ6EAD

    Where to get 4 pin to 2 pin 3.5mm adapter

    The car stereo is probably expecting a line level input. Unless the input is labeled "microphone" a preamp that supplies power to the microphone will be required; not just some connector change.
  3. KJ6EAD

    Change in site ownership

    @eeadam Adam La Barbera I presume of the same EETech that took over operation of All About Circuits a few years ago. When EETech took ownership of AAC there was much concern expressed by the forum members that it would not go well but those concerns have not been born out except for some...
  4. KJ6EAD

    How do I add specific sound to my project.

    The MP3 Trigger from Robertsonics is easy to use and well documented. There's also a WAV model if you prefer. https://www.sparkfun.com/categories/343 https://robertsonics.com
  5. KJ6EAD

    World's Greatest Cover Band

    I don't think so. That has been suggested several times in the comment sections of their videos. All were from the same person as far as I noticed and there was no response. Leonid indicated that they were trying to tour the U.S. in January, 2019.
  6. KJ6EAD

    World's Greatest Cover Band

    In my endless musical explorations I recently discovered a Russian and Ukrainian group, Leonid (Vorobyev) & Friends, that covers classic American groups such as Chicago and Earth, Wind and Fire so perfectly that it's worth sharing. I created a playlist of my favorites for your convenience but of...
  7. KJ6EAD

    Cooling soldering iron quickly after use to reduce oxidation

    Excessive wet wiping and rapid cooling only risk cracking the plating. @Bluejets had the right idea. Clean the tip and enrobe it in solder when you turn it off. The solder surface acts as a sacrificial oxidant during cooling and heating. It also protects the tip from accidental impacts.
  8. KJ6EAD

    Music playback

    https://robertsonics.com
  9. KJ6EAD

    Multimeter testing led

    If you need to test LEDs for function, color or polarity, there are a few common methods that you should know about: a button cell, a 9V battery with a 1k resistor and a dedicated LED tester.
  10. KJ6EAD

    INDIA+ POWER GRID

    He's even been trolling the Siemens PLC and switchgear support people lately. Why can't he just make his LED signs in peace?
  11. KJ6EAD

    Agh! What's that thing called? Two pins - measured time by cummulative current.

    Mercury coulometer. https://en.m.wikipedia.org/wiki/Mercury_coulometer https://ntrs.nasa.gov/search.jsp?N=0&Ntk=All&Ntt=mercury%20column%20coulometer&Ntx=mode%20matchallpartial http://datasheet.octopart.com/120PC12625-Curtis-Industries-datasheet-27869806.pdf
  12. KJ6EAD

    Fruity loops track

    It's design is intended to facilitate sales to and entertainment of idiots.
  13. KJ6EAD

    Fruity loops track

  14. KJ6EAD

    Can someone tell me what this part is called..

    If you need the connecting cable, it would likely be USB A to Mini-B like this...
  15. KJ6EAD

    4017 IC

    I was just reacting to a phrase that irks me, not accusing you, though you didn't deny unsafe, unethical or creativity deficit. ;) I have a pet peeve about platitudes. I've done a few 555/4017 sequencer projects before. You didn't say what your plan was, just wanted a source for wide dispersion...
See more
Top