I was wondering if I can’t work out the issue I have this spare display witch the wiring layout is described in the picture but it has one 6 pin connector whereas my one has one 5 pin connector and one separate connector for the blue wire witch does not connect to anything it stays unplugged...
Hello, I have an lcd from an e scooter which works but has missing segments and I was wondering if there is a way of bringing the missing segments back please?
That’s correct, I’ve been told it’s a tvs diode as the replacement I was recommended is too. Would this not being in circuit cause the short to ground?
The diode is a bio directional diode and the make of the scooter is a flykul quite an old e scooter the battery voltage is 36v and the pcb is from the stem of the scooter, it connects the power button and brake to the main board.
Hello, I have a pcb from an e scooter which had a faulty diode but even after removing it from circuit, it still has a short to ground on the three components circled. I have removed every cap on the board and tested one by one and the short is still there and all the caps test ok. Could this be...