Search results

  1. F

    100W Audio Amplfier By Smart Kit

    Today i am going to the electronics market . I think iwiil buy two pots . and by the way q6 is short so that might be the problem . what do you think , i will change the pot today and will change q7 and q6 ok , but i forgot to tell you that i am using BD825 and BD 140 in place of BD829 and BD830...
  2. F

    100W Audio Amplfier By Smart Kit

    I just want to confirm that when i apply the 1 ohm in parallel with 0.47ohm . it will not heat up and i can set the pot . because i have tried a DC millimeter but it didn't give any reading and it's fuse was broken . this can mean there is alot of current flowing through 40V lead
  3. F

    100W Audio Amplfier By Smart Kit

    The 1K pot is causing some problems no matter how much i adjust it , there is no effect on the bulb. but when i checked the pot with its common at one end and the other two pins one by one , so i found that all of them are short. this means the pot is gone. ??? ???
  4. F

    100W Audio Amplfier By Smart Kit

    Hello again , When i add a bulb in series with both the +40 And -40 of 100W/220V , the bulb heats up and there is no voltage drop across the amplifier and only the bulbs , i did also one careless mistake that i put a AC ammeter in series which burned  one capicator at the input . But what does...
  5. F

    100W Audio Amplfier By Smart Kit

    Thanks for the information , Actually how do i in actual connect the power supply in series with the millimeter. can you show me diagrammatically .. plz  :D . and secondly did you make the 100W Audio Amplifier by Smart Kit Yourself .. thnx... 
  6. F

    100W Audio Amplfier By Smart Kit

    I have disconnected the 0V neutral lead , nothin heats up except the goddamn 0.47 ohm (5W) R2 And R16 Resistors but the amplifier loads up perfectly , not even the transistors heat up . maybe i shoould place 1K resistor of 1 Watt in parallel with them  ??? as written on the manual. But is this...
  7. F

    100W Audio Amplfier By Smart Kit

    The Power Supplies neutral rail is getting burned out , not the amplifier's neutral connection. i think that there is something wrong at the amplifier end , but the thing is i have double checked every short connection , only one transtor Q6 seems to be short , but otherwise i have checked the...
  8. F

    100W Audio Amplfier By Smart Kit

    Hello , my name is faizan brohi , There is a 100W Audio AMplifier Project in the Audio Section of the projects By SmartKit. The PRoblem That i am facing is that the power supplies neutral wire goes red and then breaks in the PCB Board. Ofcourse this means that the amplifier circuit is short ...
View older results
Top