Search results

  1. nikhil arora

    heat sink for transfomer

    I live in ahmedabad which is in gujarat state Now can u tell me is there any dealer for maru in my city or near me
  2. nikhil arora

    heat sink for transfomer

    yes another transformer heat is only 5-10% of the heat of the the first one but the faulty transformer was still working and giving good voltage even it is short it is possbile.
  3. nikhil arora

    how to design very small 6V power supply @100mA

    i have open one of the charger i found no ic in it but just a small transformer and 1 or  2 transistor. and other components. thats it. i donot know how much ripple is there in the ouput of charger as i don't own cro.
  4. nikhil arora

    heat sink for transfomer

    i think this is the problem so how to check the transfomer quality in my city the quality is poor most of the times is there any method to check transformer quality I  tested my ckt without load and even without regulator ckt only transformer was kept on and i observed that 70-80% percentange...
  5. nikhil arora

    heat sink for transfomer

    my ckt required only 200mA at 5.1V and transformer rating says 9Vac 500mA
  6. nikhil arora

    heat sink for transfomer

    how to reduce transformer heating how to take away heat from the transfomer as we use heatsing for transistors is this possible with transformer My ckt needs 5.1V@200mA i have used 9Vac transformer 500mA rating on its box i cann't say how much it can deliver. Now i am drawing only 200mA even...
  7. nikhil arora

    Download Elektor Journal Here...

    8) It is better if u include the size and the language in which the magazine is it would be better
  8. nikhil arora

    Download Elektor Journal Here...

    may be these can work: www.elektrotekno.com www.AvaxHome.ru www.elektor-electronics.co.uk www.elektor.de http://www.elektor-electronics.co.uk http://www.elektor.de or this ebook password cracker software can work ;) eBook-RAR-Cracker-v3.rar
  9. nikhil arora

    how to design very small 6V power supply @100mA

    how can i buy such modules can you send me some pics or similart things so i can get a idea i am also going to open one charger of my mobile phone so i can get more ideas
  10. nikhil arora

    Serial communincation between two Microcontroller using IR

    i have done that in very good manner using TSOP1738 as reciever and a IR led driven by NE555 as transmitter. now to send signals you just have to connect the reset pin of NE555 to Tx of 89c51 and that it and write a simple test program. now TSOP1738 is costlier then simple ir-photodiode but...
  11. nikhil arora

    Plz help me in understanding this RF reciever

    this RF reciever was in car alarm, how unreliable can be this reciever, i have got a 433Mhz module which is PLL and crystal controlled actually i want to ask how reliable this reciever can be...
  12. nikhil arora

    SMPS(Switch Mode Power Supply)

    if you are totally unknown then u can also go for http://en.wikipedia.org/wiki/Switching_power_supply
  13. nikhil arora

    how to design very small 6V power supply @100mA

    Guru Can you provide me some guidance for designing such a supply even some good links can help me...........Smallest possibe............ zak4000  can know what are these from http://en.wikipedia.org/wiki/Switching_power_supply
  14. nikhil arora

    how to design very small 6V power supply @100mA

    i have little idea that this can be done by two methods 1> Tansformerless design 2> Switching power supply design now i want to have very small transformer or no transformer at all
  15. nikhil arora

    computer games

    i have started a google group and I invite you there this group is for games, especially for those who have slow PC like PIII or PII or celeron or similar and low end graphics card or use onboard graphics cards which comes with motherboard http://groups.google.co.in/group/game4slowpc post here...
  16. nikhil arora

    Plz help me in understanding this RF reciever

    and what is use of capacitors and when and how it will give outputs. i.e when it recieves 433mhz signals
  17. nikhil arora

    Plz help me in understanding this RF reciever

    now after this stage in the ckt we have a stage using opamp this configuration of opamp is also confusing can u help me on this.
  18. nikhil arora

    how to make a communication b/w two robots connected to the central system?

    compare to 900mhz or 2.4ghz radio modems  433mhz and 315mhz are more cheaper and easily available.
  19. nikhil arora

    Plz help me in understanding this RF reciever

    and the first L and 5pf capacitor makes the tank ckt to select 433Mhz
  20. nikhil arora

    Plz help me in understanding this RF reciever

    this was used in car alarm reciever 433Mhz, plz help me how this thing work
Top