Search results

  1. mixos1

    [README] How to see the attached images

    If image attachments exceed 690 pixels in width will be automatically resized to fit the forum width. This may make them unreadable in some cases. To view the image in full resolution just click on the image name.
  2. mixos1

    constant current source

    Here is a current source using an OPAMP. It will work nicelly with LM324. Alternative you can check at the datasheet (page 10) for another current source circuit. LM324 Datasheet http://www.national.com/ds/LM/LM124.pdf Hope that gives you a start point.
  3. mixos1

    "Notify of Replies"

    I can't do nothing about ";" I suggest you to upgrade your system. Try to copy paste the link to your browser after open it.
  4. mixos1

    Function Generator for Sinewave 122k Project

    Hi gsmaster Which was the max output frequency your friend achived? Did he take 20Mhz?
  5. mixos1

    "Notify of Replies"

    The problem is located to your e-mail client. It can't understand the ";" as part of the URL. So in this URL: http://www.electronics-lab.com/forum/index.php?board=4;action=display;threadid=804;start=new it will understand this as a link: http://www.electronics-lab.com/forum/index.php?board=4...
  6. mixos1

    "Notify of Replies"

    ;)... that's was the fault.. If your e-mail client can't highlight all the URL then you have to copy paste it to your browser manually, that's nothing you can do about it.
  7. mixos1

    Function Generator for Sinewave 122k Project

    It's because the name is wrong. The right name is MAX038. I will correct the project because it is showing it wrong. Try again to find it. Alternative you can buy it online here: http://www.futurlec.com/ICMaxim.shtml
  8. mixos1

    "Notify of Replies"

    The link included to the e-mail drives you directly to the topic that anwered and not the index page. Here is a sample link generated when answering this topic: http://www.electronics-lab.com/forum/index.php?board=4;action=display;threadid=804;start=new This is driving you in to the topic not...
  9. mixos1

    8 SOIC to DIP adapter

    The soldering made using an common soldering iron with a thin tip nothing more nothing less.
  10. mixos1

    Generators

    This capacitor bank exsperiment unfinished, but with 16x 630 volts at 0.0022 uf, i powerd from the high voltage output of the high voltage multiplier circuit, powerd from the microwave oven motor generator, in the rest after i powerd the capacitor bank up i then shorted the 2 high voltage output...
  11. mixos1

    Users database -> maintenance

    Users with no valid e-mail adresses was deleted from the users database to keep the database clear and the forum in a high quality state. All e-mail adresses that bounced back after the update notification e-mail sent to all users of Electronics-Lab community counted as invalid. If you think...
  12. mixos1

    "Notify of Replies"

    I made a test message, to test what you mention above... but no notification came to my answer post. Did you noticed this more than once? Maybe there was an answer almost the same time (before or after your post) and for that's why you received the notification. About the direct link to the...
  13. mixos1

    "Cannot Connect", again and again

    I know, I saw this also! I will do my best.
  14. mixos1

    Hameg HM205 Oscilloscope Manual

    Thanks for your kindness. I already found the Hameg HM205-2 manual in english, but i have it only in a hard copy. If anyone need this also, please contact me.
  15. mixos1

    "Cannot Connect", again and again

    You can still use: http://www.electronics-lab.com/forum/index.php including www <== Also only this http://electronics-lab.com is working without www Thanks for your feedback
  16. mixos1

    "Cannot Connect", again and again

    Has anyone seen any fatal error the last day? I didn't see any.
  17. mixos1

    Generators

    In these pictures i used a small elctronic circuit box to install the microwave oven moter/ generator into. first i had to cut and file a tryangle hole in it so that the plastic part of the generator with the terminals sticking out ,will protrude through. then i drilled the holes and inserted 2...
  18. mixos1

    Thank you Mixos!

    ;) You are welcome Ante! Thanks for your support to this site. You give life to it! :D
  19. mixos1

    8 SOIC to DIP adapter

    Anyone needs a 8-SOIC to DIP adapter? Here is one used to connect a AT45DB041B memory to breadboard.
  20. mixos1

    Generators

    in this setup are 2x 6kv 0.0022uf ceraimcs solder together in parralell with only 1x 1m 1/2 watt resistor, this mini marx setup works good and runs off the high voltage multiplier circuit which is powerd up by rotateing the microwave oven motor generator, so in this exsperiment it wsent...
Top