Search results

  1. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    Goodmornin steve, i desoldeer the fm, and i soldeer it, i hear 1 station with earphone, speaker he have very low volume
  2. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    I use stannol, but audioguru, when i start to solder i use dvm everythink the result was like in book, when i measure
  3. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    They have another resistance not like in book i dont know what to do here the result T15:TP1=4.11V T15:TP2=0.54V T15:TP3=7.33V T15:TP4=7.33V T15:TP5=1.32V T15:TP6=7.92V T15:TP7=1.32V i go to desoldeer FM party and i send you foto tomorow.
  4. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    this a Hi, i desoldeer all the party of AM, and i soldeer it again beter, and i change LM386 and holder and also al capacitors lytics, , and i solder again no result, so i desoldeer also the potenitomer, now when i rotate i hear voice low and high, but but not so high, and i get no signal, what...
  5. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    Hi Kellys, when i cuts a leads shorter, i dubbel check are all components connected, so when i put the hand to pot or capacitor, they change the noise make it more noise, i desoldeer on capacitor and i put new, again the same problem,
  6. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    Hi Edd, that problem is not anymore, ii hear only low low noise, and i tune and R20 its stal 1.6V and when i toch the pot where is solder it with finger it comes more noise, i dont understand after R20 it stay at 3.16V, maybe something with pot, problem ( i just think) because the same noise for...
  7. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    thnx man
  8. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    ooh my god, but what do you think, maybe the board is bad? because like i say before, i did the test like they say in book(i mean with dmm) everythink was correct
  9. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    Hi i make it, but nothing changes...…….
  10. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    Yes all components are in rights position
  11. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    Rely the leads of transistor or capacitor resistor, to cut shorter, ah i gonna do it thnx
  12. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    no i think lees
  13. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    oh sorry i misunderstand you, what do you mean with trim?
  14. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    I forget to tell you, when i did step by step like in book, i have measure everything was like in book the result, but i dont know what wrong
  15. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    You mean to put a little bit soldeer?, i was think it is more good if you soldeer it like this:(
  16. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    This the best i can do
  17. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    Hi, i did not make so good picture, so i make a photo, i dont have photoshop to change a little bit contrast, here is the picture
  18. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    yes but he does not work...……..
  19. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    thnx man i buy compleet kit, so i did step by step, but is not working
  20. M

    Hi, have anyebody had trouble building the ELENCO 108 AM/FM RADIO KIT

    i can show you tomorow no problem?
Top