I'm using the LM5166 (Fixed 5V) version, the data sheet suggests to use a tantalum or aluminium capacitors for the input capacitor. The data sheet says that the capacitors is selected mainly because of its RMS current rating and Voltage rating. A higher capacitance just helps in case there's a...
Can't route from the 'IN' pad of the MP2672A li-ion battery charger IC. The pad is too small. How to fix this? I'm worried if the footprint itself is wrong.
I want to use a dual LED in my schematic. The dual LED used is common anode. The LEDs should be controlled by a single pin from a battery charger IC. At one event the pin is pulled low, LED 1 should be ON. At another event, the pin open-drained. I've connected a 10k ohm resistor from my common...
I want to use the TPS63002 for a project. This IC has two ground pins, power ground and control ground. I understand that the power ground is a return path for the high current switching transistors and the control ground is a reference for the error amplifiers and other digital logic stuff. But...
If I wanted to connect two 4S Lipo batteries, with unequal charges in parallel, and get a constant output voltage, with minimal heat dissipation, how would I do this?