Search results

  1. endlessparadox

    Electronic Circuit error

    Works now problem was the IC was burnt and that i only had to move the lower alternative on track to the right
  2. endlessparadox

    Electronic Circuit error

    i did continuity test nope and it is my 2nd time and i have this problem 2 times a row let me check and write back
  3. endlessparadox

    Electronic Circuit error

    Just precise what part is Q1 and D1
  4. endlessparadox

    Electronic Circuit error

  5. endlessparadox

    Electronic Circuit error

    im sorry if im annoying if you dont have the patience to help then just stop replying this thread i dont wanna beg but the only problem i got from this thread so far is the led problen which i fixed by moving to the e line in the breakboard.For the schematic i posted it in one of the comments...
  6. endlessparadox

    Electronic Circuit error

    Red cables are ac
  7. endlessparadox

    Electronic Circuit error

    there is already watch the circuit there is 3 points with number 1,2 and 3
  8. endlessparadox

    Electronic Circuit error

    i moved the end resistor lead from d21 to e21 and d22 to e22 basically i i removed everything from the d track except the diodes and moved resistance lead and led lead to the e track There is no schematic for the power supply just a bridge a 7812 voltage regulator a 1000 micro farad 50 v...
  9. endlessparadox

    Electronic Circuit error

    I moved the resistance one round lower same for the led so that there is no direct connection with the ac supply(~) but the transformer is still sending out 4v instead of the expected 14v there seems to be an error i checked all the diode capacitor etc... It is the 2nd time i made this circuit
  10. endlessparadox

    Electronic Circuit error

    There is a cross that separate the 2 ~ there is no zener only a 7812 voltage regulator with a capacitor and at the end a led to check if it is working or not.The circuit down i think doesnt matter for now because the power supply itself wont work
  11. endlessparadox

    Electronic Circuit error

    it is a step down 12 v transformer the ~ icon get the 12v from the secondary winding of the transformer which means transformer output there is a cross between the two input meaning i cutted the track there. I can remove the red tracks but it wont change anything because there is nothing there
  12. endlessparadox

    Electronic Circuit error

    Hello i have to build this circuit where you see the ~ icon it is the 2 input from a step down 14v transformer.When it is disconnected the transformer give 14v, when it is connected it gives only 4v there should be a defect in the circuit can someone help me find it please?
  13. endlessparadox

    Need to build a circuit + Power supply check plan for me

    Harald i think there is a misunderstanding in reality the resistance+led didnt work because the copper tracks were oxydated and didnt let current pass.
  14. endlessparadox

    Need to build a circuit + Power supply check plan for me

    Abou About this do you think you could explain it to me a bit better why? And yes i realised a big mistake totally forgot the +Ve and the -Ve when i checked the ic info sheet :confused: Im gonna fix it and try it again but if there are others mistakes i would like to fix them.:)
  15. endlessparadox

    Need to build a circuit + Power supply check plan for me

    A bit late but i assembled the track it doesn't work sorry im naturally a bad drawer but i think it should be easier to understand I dont wanna use something else than pencil for now because im changing it each time :P
  16. endlessparadox

    Resistance + LED works on breakboard not on stripboard?

    just a resistor connected to a led.There is the resistor and the 2 led cables that go to the led.Yes in series
  17. endlessparadox

    Resistance + LED works on breakboard not on stripboard?

    wait have a hard time understanding it. On the breakboard there is a line where electricity conduct isnt it the same on a stripboard?
  18. endlessparadox

    Need to build a circuit + Power supply check plan for me

    Like the title says i need to build this circuit on a stripboard with a power supply: The power supply circuit isnt included but it is connected to this circuit.You dont need to matter about the pieces part just watch if the connection links or breaking of copper tracks with are the rounds...
  19. endlessparadox

    Resistance + LED works on breakboard not on stripboard?

    Like the title says why? Here are some pictures if it helps I tried removing them from the breakboard to the stripboard like 3 times.I tried soldering all the cables even with the batteries cable.I tried without soldering.I tried putting the battery leads directly on the coppertrack.It refuses...
  20. endlessparadox

    Does Solder bridge on a strip board matters if it is in the same copper track?

    Does Solder bridge on a strip board matters if it is in the same copper track? Like i said when i am soldering on the strip board i always make bridges but these bridges are on the same copper track.Does it matter?
Top