Search results

  1. russwr1

    Unusual Transformer Windings Ratio Problem. Tech comments Needed!

    I studied US Patent 3980053 vigorously years ago. I typed 2 pages of proof reading errors made by the Patent Examiners. Doing a recent review of my findings, the ratio of windings is lastly, still a problem. The main circuit is just a beefed up capacitor discharge ignition at 600watts, and used...
  2. russwr1

    Connecting 2 voltage sources power supplies together to same end load resistance, to increase final voltage.

    AI answer to question of combining 2 power sources together in the same time to electrical load, such as for instance firing spark plug as electrolysis with small electrodes requiring much higher voltage...
  3. russwr1

    Failures of Capacitors and diodes from over voltages applied??

    In general, diodes and capacitors in circuits fail because of overheating. If ignition coil high volts is applied as in milliseconds pulses of 24kv, would the 1kv devices still function? There is no heat from high voltage wires. Needing suggestions for Isolation. (Not wanting high voltage diodes...
  4. russwr1

    Is crossover Leakage Induction Voltage useful In An Adjacent Power Circuit Line ?

          A Power Circuit from 2008 showed high voltage line with its 5 turns coil wrapped with 7 turns coil  from the low volts line with amps. Core steel rod was not under the low volts coil as electromagnet.  There is a 90-120volts of crossover...
  5. russwr1

    Is crossover leakage induction voltage useful in ADJACENT circuit line?

    A Power Circuit from 2008 showed high voltage line with its 5 turns coil wrapped with 7 turns coil  from the low volts line with amps. Core steel rod was not under the low volts coil as electromagnet.  There is a 90-120volts of crossover leakage induction volts transferred to 7 turns and is to...
View older results
Top