Search results

  1. ante1

    LED pulser help

    The TLC272 should not be a problem here.
  2. ante1

    LED pulser help

    If you take out the regulator there will be other problems since the voltage over the transistor will be much higher (more heat)! Can you measure the voltage over the LED/resistor while fully lit? It would be very helpful to know some data for your LED
  3. ante1

    LED pulser help

    It would be interesting also to know what kind of power source you
  4. ante1

    Is a GFCI outlet a good or bad idea for an electronics workbench?

    Omni, Don
  5. ante1

    16 or 24 Cannel Gang Switch

    I thought maybe you had already decided on a specific type of relay suitable for audio. I am not sure if there are some special requirements for such relays?
  6. ante1

    white led

    As with transistors in parallel you can
  7. ante1

    adding sound to a clock

    If you don
  8. ante1

    DIN5 F to miniDIN 6 converter

    Have you tried
  9. ante1

    16 or 24 Cannel Gang Switch

    Does the high power relays have any extra contacts that could be used to latch?
  10. ante1

    Strange Screening Problem

    Have you grounded the circuit like it shows in the diagram? The
  11. ante1

    Is a GFCI outlet a good or bad idea for an electronics workbench?

    Omni, I have never seen any problems with GFCI
  12. ante1

    "Tenna" PS-20 power supply

    Perfect! This article is an in depths walk through of the 723 internals and the surrounding circuitry!
  13. ante1

    prevent live and neutral from changing.please help

    A couple of relays might help.
  14. ante1

    "Tenna" PS-20 power supply

    That
  15. ante1

    StepUp dcdc smps (car amp)

    All right, Thanks gevv!  ;)
  16. ante1

    UNIVERSAL BATTERY CHARGER/DISCHARGER(PLZ help)

    What
  17. ante1

    hellp.........

    Yeah that
  18. ante1

    WATER LEVEL MONITOR FOR PUMPS

    Between gates there should be no reason for resistors.
  19. ante1

    Interesting site!

    I must have missed that one back in the eighties; I don
  20. ante1

    WATER LEVEL MONITOR FOR PUMPS

    This will probably be useful: http://www.personal.dundee.ac.uk/~gathomso/EG2103/pull-up.doc  ;)
Top