Hello,
Wich parts do you have?
The wiki shows this:
https://en.wikipedia.org/wiki/AN/ARC-5
Also a dutch radioamateur has a page:
https://www.pa3esy.nl/military/us/air/ARC-5/html/arc5_set.html
Google images shows a lot of schematics...
Hello,
Power can be calculated with this rule:
Power is not the only thing that matters in loudness.
Also speaker efficiency comes in play:
https://www.lifewire.com/amp-power-speaker-efficiency-3135077
Bertus
Hello,
Without the exact details of the switch it is not possible to give you a wiring diagram.
There are many configurations of slide switches.
Bertus
Hello,
Your switch is a look alike from this page:
https://www.alibaba.com/product-detail/Mechanical-4-position-10-pin-slide_60665173897.html
The stated current on that page is 0.3 Amp.
Bertus
Hello,
No, the code 560 stands for 56 pF and 561 stands for 560 pF.
Have a look at this page for capacitor codes:
https://www.electronics-notes.com/articles/electronic_components/capacitors/capacitor-codes-markings.php
Bertus
Hello,
The part is a capacitor with a value of 0.1 uF or 100 nF.
The K stands for the tollerance of 10 %.
Have a look at this page for reading capacitor codes:
https://www.electronics-notes.com/articles/electronic_components/capacitors/capacitor-codes-markings.php
Bertus
Hello,
You could blast some contact cleaner in the potentiometer near the connections:
This could remove dirt from the carbon track, when moved a couple of times all the way up and down.
Bertus
Hello,
Those are large displays with multiple leds in one segment.
That is why the forward voltage is 7.4 Volts.
The stated current is for each segment.
If all segments are on there will be 7 X 10 mA drawn from the supply = 70 mA for each display.
Also if the decimal point is used, extra...
Hello,
As @Martaine2005 said, the user has not been online a long time.
The profile states his last visit was on nov 6, 2009.
Perhaps you can find info in the following manuals:
7L13_sm.pdf
7l13.pdf
Bertus
Hello,
The diode is probably there to avoid current going back into the left oscillator.
You might also be interested in the following page:
https://www.allaboutcircuits.com/technical-articles/how-to-design-schmitt-trigger-oscillators/
Bertus