Search results

Search Forums New Posts
  1. baldguyfromblackpool

    Burnt component on module

    Some info available at an archived Fiero forum. They suggest as possible replacements, BUZ24, 2N6763, 2SK561, 2SK906, 2SK1429, NTE2389, or BUZ10S2 .. I think these are all N-type enhancement mode FETs bar a couple. It's an archived site so even these equivalents, might be in need of updating...
  2. baldguyfromblackpool

    Burnt transistor/resistance

    Just some Googles, Maybe B&Q / Kingfisher / Blyss / Challenge, Dehumidifier D002A ? Found a couple of similar boards, but they're not quite the same https://shorturl.at/SZo3u https://shorturl.at/K6bWo Broadly similar power boards in D003A, D015B, D016B ? Unfortunately not much help to give...
  3. baldguyfromblackpool

    3296W series multiturn trimpot

    Thanks very much indeed for the help you've given me! Some soldering to do now I don't know why the G6Y-2P relay has a polarised coil, they draw specific attention to making sure it's correctly connected in the datasheet. I'm wondering if it has a spike protector diode already built into it.
  4. baldguyfromblackpool

    3296W series multiturn trimpot

  5. baldguyfromblackpool

    3296W series multiturn trimpot

    Thanks. I'll try and attend to that..
  6. baldguyfromblackpool

    3296W series multiturn trimpot

    HLMP-D150 Avago Technologies Led Red T-1 3/4 (5mm) 637 Nm 1.6 V 1 Ma 3 Mcd Bulb Size: T-1 3/4 (5mm) Forward Current If: 1mA Forward Voltage: 1.6V LED Colour: Red LED Mounting: Through Hole Lens Shape: Round Luminous Intensity: 3mcd Packaging: Each Viewing Angle: 65°...
  7. baldguyfromblackpool

    3296W series multiturn trimpot

    Ahh ok, I've got an LED hanging off the end of the base resistor as an indicator. So if I said (3 - 0.7) / 0.00267 A (the LED takes 1mA) that'd be.. 861.42Ω Would I be better with the LED in parallel with the relay coil?
  8. baldguyfromblackpool

    3296W series multiturn trimpot

    From its datasheet, relay is G6Y-2P, 12V coil, 16.7mA, 720Ω So I want 1.67mA into the base when the control line goes to 3V? The indicator LED wants 1mA to light up. I'll have to get maths head on. So R1 must supply 2.67mA, and in fact delete R2 altogether? I'm getting R1 = 112.36Ω, seems low?
  9. baldguyfromblackpool

    3296W series multiturn trimpot

    3296W series multiturn trimpot... e.g. https://docs.rs-online.com/d700/0900766b8069ccf4.pdf https://www.bourns.com/docs/technical-documents/technical-library/trimmers/technical-articles/ap_proc.pdf Does anyone know if 3296W trimpots have a linear or logarithmic response? I can't see anything...
View older results
Top