About the "50V – 10A BIDIRECTIONAL DC MOTOR DRIVER USING A3941" issue

[kmimax]

Connect the 48V/7A power supply directly to the 48V/6A DC motor and it works normally. But after accessing (A3941), once the logic high level control is input, an error is reported! (F1=0, F2=1). why? What are the requirements for this module for inductive loads?

 

[HarryA1]

an error is reported! (F1=0, F2=1). why?

from: http://static6.arrow.com/aropdfconversion/ee14f7b4a3764f5a2d5bf5d73381b76d11c173d/3a3941-datasheet.pdf.pdf