Business Cards

[biferi]

I am a Computer Graphic Artist and a Computer Repair Tech.

I got the Avery Blank Business Cards and made my own Business Cards.
And then I go to Rip them apart they do not look very Clean and good.

So I try useing Photo Paper and I used a Paper Cutter.
And they still looked very bad.

I have a Photo Printer and I wanted to know whare can I Buy the Blank Business Cards that say Staples gives you if you go to them to have Business Cards Printed?

Thanks.

 

[Harald Kapp]

Printing on single blank business cards is a challenge for the average printer. They are usually not designed to print on such small a format.
Here's a wide selection of letter sized blanks. The microperforated type should give clean edges after separation (as should the Averys have given).

 

[(*steve*)]

Another option is to print them on card of a suitable sure and to use a laser cutter to cut them.

A sufficiently high power laser cutter will cut the paper with minimal discoloration.

Where to find a laser cutter? Do you have a local hackerspace (aka makerspace). They may have one.